TSB

screen printing => Equipment => Topic started by: Prosperi-Tees on October 23, 2013, 11:00:24 PM

Title: Anatol Qrunner
Post by: Prosperi-Tees on October 23, 2013, 11:00:24 PM

Anyone know if the qrunner will work on any press?

Title: Re: Anatol Qrunner
Post by: TCT on October 24, 2013, 07:59:22 AM

Doubt it. The control cord that goes into it gets the signal from the press. I would find it hard to believe they or any other company would make it a universal plug, or a program that would work over other brands.

Title: Re: Anatol Qrunner
Post by: Printficient on October 24, 2013, 08:34:10 AM

No only on Anatols.

Title: Re: Anatol Qrunner
Post by: IntegrityShirts on October 24, 2013, 09:52:55 AM

It'll have their proprietary plug and inside controls.  I'm sure it can be rewired to trigger off an optical sensor or microswitch if your press head has the capability to draw in the flash and push it back out.