TSB

screen printing => Waterbase and Discharge => Topic started by: noortrd on August 29, 2013, 01:17:20 PM

Title: 301 flash temprature and time
Post by: noortrd on August 29, 2013, 01:17:20 PM

Anybody tell us that  the flash temprature and time on matsui water based 301 series.

Title: Re: 301 flash temprature and time
Post by: screenprintguy on August 29, 2013, 01:19:17 PM

our Reno at 1,000 degrees flashes in 10 seconds, when boards are hot, it will flash 301 between 6-8 seconds, but depends on humidity in the air, mesh count, 1 or two stokes, you'll have to test depending on your conditions

Title: Re: 301 flash temprature and time
Post by: noortrd on August 29, 2013, 01:48:45 PM

160 degree or 180 degree?.

Title: Re: 301 flash temprature and time
Post by: screenprintguy on August 29, 2013, 03:33:59 PM

I'm seeing between 180 and 200, but that's 1 stroke through a 125 mesh, and it's pretty humid today.