TSB

screen printing => Equipment => Topic started by: Nick Bane on February 26, 2013, 01:15:10 PM

Title: broken gauntlet indexer
Post by: Nick Bane on February 26, 2013, 01:15:10 PM

broken indexer coupling on 98 gauntlet 8c  >:(

Title: Re: broken gauntlet indexer
Post by: Nick Bane on February 26, 2013, 01:16:28 PM

the broken part.

Title: Re: broken gauntlet indexer
Post by: Nick Bane on February 26, 2013, 01:19:25 PM

on the hunt for a replacement now.  any ideas anyone?


Thanks,


Nick

Title: Re: broken gauntlet indexer
Post by: 3Deep on February 26, 2013, 01:19:34 PM

Almost 15 years not bad, looks like a simple fix but I could be wrong.

Darryl

Title: Re: broken gauntlet indexer
Post by: Nick Bane on February 26, 2013, 01:28:57 PM

yeah im hoping that will be the case.  if i can find the part or not will be the issue i think.

Title: Re: broken gauntlet indexer
Post by: Sbrem on February 26, 2013, 01:31:01 PM

Call M&R, they usually have parts for our '94...

Steve

Title: Re: broken gauntlet indexer
Post by: mk162 on February 26, 2013, 01:33:58 PM

M&R or mcmaster-carr

Title: Re: broken gauntlet indexer
Post by: Binkspot on February 26, 2013, 01:54:06 PM

If memory servers me right the broken part is just a stud that screws into the adjusting coupling. It may be a left hand thread. You should be able to loosen the lock nut, unscrew the stud and match it at an industrial supply.

Title: Re: broken gauntlet indexer
Post by: tonypep on February 26, 2013, 02:19:08 PM

Bill Foust @ Aero or Press Tech

Title: Re: broken gauntlet indexer
Post by: Nick Bane on February 26, 2013, 03:06:10 PM

just got part ordered from M&R, should be here 10:30am tomorrow.

Thanks everyone.

Nick

Title: Re: broken gauntlet indexer
Post by: cvreeland on February 26, 2013, 09:23:00 PM

Dave Heath at http://presstech.net/ (http://presstech.net/) knows those old machines inside & out, & has helped me out of more jams than I could list here. Great guy, has some good after-market alternatives for the series 1 machines.