TSB

Artist => General Art Discussions => Topic started by: terryei on June 15, 2011, 07:35:21 PM

Title: driving me crazy
Post by: terryei on June 15, 2011, 07:35:21 PM

I use CorelDraw x3
attached is a logo I'm trying to re-do.
how do you get the s and the c to intertwine? Sometimes the c is in front, then another part is behind.
I've tried everything, and can't seem to figure this one out...
thanks
Terry

Title: Re: driving me crazy
Post by: Command-Z on June 15, 2011, 08:46:53 PM

Cut the S at the center of each curve. Cut exactly horizontally so the outlines match.  It will be 3 pieces. Then put the center piece behind the C.

Make sure the C has no outline, then copy it and make the outlined C be the very bottom piece.

Title: Re: driving me crazy
Post by: terryei on June 15, 2011, 11:02:50 PM

OK, how?
I know I'm being really stupid.
thanks

Title: Re: driving me crazy
Post by: Command-Z on June 15, 2011, 11:37:22 PM

Someone will have to correct me re: Corel, but there should be a Scissors tool or something like that to cut a line.

Title: Re: driving me crazy
Post by: terryei on June 16, 2011, 12:57:03 AM

Thanks Man,
There is a knife tool. Never used it before, worked great.
Thanks again.
Terry