TSB

Embroidery => General Embroidery => Topic started by: jmd on July 22, 2012, 12:07:23 PM

Title: Tajima help
Post by: jmd on July 22, 2012, 12:07:23 PM: Just purchased a used TEHX C1501 for sampling, as I was tuning and timing it up I noticed the needle touches the fabric before the presser foot does. I can't get any more downward adjustment on the foot, its off a good 1/8" or more. Any thoughts.
Thanks
Title: Re: Tajima help
Post by: jasonl on July 22, 2012, 02:06:44 PM: Quote from: jmd on July 22, 2012, 12:07:23 PM
Just purchased a used TEHX C1501 for sampling, as I was tuning and timing it up I noticed the needle touches the fabric before the presser foot does. I can't get any more downward adjustment on the foot, its off a good 1/8" or more. Any thoughts.
Thanks

there are videos and instructions online, google it. thats how I learned. I have to look at the instructions whenever I do it.
Title: Re: Tajima help
Post by: jmd on July 22, 2012, 05:27:52 PM: Thanks, I have been down that road with little helpful information. I am experienced with setting the timing and the needle bar ht stops, but have never come across this problem before. I am starting to think its an adustment in the lower recipricator, but I don't think that is possible.
Title: Re: Tajima help
Post by: evilcaps on July 23, 2012, 10:41:23 AM: Check This link.

Scroll down to videos, you will find the answer you r looking for.

http://www.hirschinternational.com/Support/Manuals-Videos/Tajima-Embroidery.aspx (http://www.hirschinternational.com/Support/Manuals-Videos/Tajima-Embroidery.aspx)
Title: Re: Tajima help
Post by: mooseman on July 24, 2012, 06:32:29 AM: join the tajima users group on yahoo groups...lots of good info and the techs look in now & then.

couple of links

http://groups.yahoo.com/group/TajimaUsers/ (http://groups.yahoo.com/group/TajimaUsers/)
http://groups.yahoo.com/group/TajimaPlus/ (http://groups.yahoo.com/group/TajimaPlus/)

mooseman
Title: Re: Tajima help
Post by: jmd on July 24, 2012, 08:45:03 AM: Thanks all, I figured it out, there is a window on the left side where the motors are located. adjusted cam on PF arm. Didn't have to take anything apart except a cover.
Title: Re: Tajima help
Post by: inkman996 on July 24, 2012, 08:49:30 AM: I watched the video for replacing the reciprocator holy cow i thought replacing one on a barudan was a lot of work!