TSB

screen printing => Equipment => Topic started by: Ross_S on December 30, 2019, 07:55:09 PM

Title: M&R Side Conversion Kit for Chameleon
Post by: Ross_S on December 30, 2019, 07:55:09 PM

Has anyone ever converted a rear clamp manual to side clamp?  I just got my kit in to do so but they have no diagrams or instructions for it.  I'm looking for help on this or really just a close up picture so I can make sure I'm doing it correctly.  M&R has no documentation on this.

I don't think it is going to be difficult but I really just need a good picture to go off of.  Any help would be appreciated thanks

Ross

Title: Re: M&R Side Conversion Kit for Chameleon
Post by: gotshirtz001 on December 31, 2019, 10:57:22 PM

(https://uploads.tapatalk-cdn.com/20200101/2bd0a6de68f85c08dd85cc68b104ce31.jpg)

This should give you a couple angles. The cross bar uses the top bolt holes on the head face. The bottom holes are unused. 


Sent from my iPhone using Tapatalk

Title: Re: M&R Side Conversion Kit for Chameleon
Post by: gotshirtz001 on December 31, 2019, 10:58:48 PM

(https://uploads.tapatalk-cdn.com/20200101/3f74ea0ef8b22c9c978d315dd7eeac27.jpg)

Here’s another I packed up to sell


Sent from my iPhone using Tapatalk

Title: Re: M&R Side Conversion Kit for Chameleon
Post by: gotshirtz001 on December 31, 2019, 11:02:55 PM

(https://uploads.tapatalk-cdn.com/20200101/366c6a6455204d6d29e9ac447f801ce8.jpg)

From the manual


Sent from my iPhone using Tapatalk

Title: Re: M&R Side Conversion Kit for Chameleon
Post by: Ross_S on January 01, 2020, 07:38:30 AM

Those are good pics; thank you.