TSB

screen printing => General Screen Printing => Topic started by: ericheartsu on April 23, 2018, 03:16:31 PM

Title: excessive adhesive
Post by: ericheartsu on April 23, 2018, 03:16:31 PM

One of our guys messed up, and laid down to much adhesive, holding down a very thin windbreaker.

Any tips on what we can do to  remove the excess glue?

Title: Re: excessive adhesive
Post by: Homer on April 23, 2018, 03:18:12 PM

what type of glue is it? Spray or waterbase?

Title: Re: excessive adhesive
Post by: Frog on April 23, 2018, 03:20:51 PM

Do you use pallet tape?
Peel and do it again.
If you want to be lazy, put a linty shirt (maybe fleece) on and off a few times.

Title: Re: excessive adhesive
Post by: ericheartsu on April 23, 2018, 03:35:18 PM

sorry i should have clarified more in the original post!

It's waterbased adhesive, that transfered onto the inside of a nylon jacket!

Title: Re: excessive adhesive
Post by: Frog on April 23, 2018, 03:54:55 PM

Damp rag on jacket inside-out on board (not the board with excess adhesive!)

Title: Re: excessive adhesive
Post by: Homer on April 23, 2018, 04:19:09 PM

yeah a damp rag or just wash it! we have a washer here.....AKA a bucket with a powerwasher...should come right out