TSB

General => Manufacturer's section => M&R => Topic started by: cbjamel on August 17, 2017, 06:55:07 PM

Title: 97 Guantlet 2 acting up
Post by: cbjamel on August 17, 2017, 06:55:07 PM

I think sensor  but i have tried replacing front and rear does same thing. What am i missing.
Video of it.

https://goo.gl/photos/tCvSXuJdTsFV8u2C8

Thanks,
Shane

Title: Re: 97 Guantlet 2 acting up
Post by: dirkdiggler on August 17, 2017, 10:14:55 PM

Can you go under the machine and manually press the mac valve?  Press it a bunch of times and see if it keeps doing that.  It could be bad.

Title: Re: 97 Guantlet 2 acting up
Post by: CGS on August 17, 2017, 10:22:47 PM

Pneumatic issue -- Mac valve or stroke cylinder,  since it looks like an air drive print head, is sticking, or has a nick / fold over on seal and is blowing by at times

Title: Re: 97 Guantlet 2 acting up
Post by: cbjamel on August 17, 2017, 10:38:34 PM

i will look and see. Thanks guys for the ideas.
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk

Title: Re: 97 Guantlet 2 acting up
Post by: cbjamel on August 18, 2017, 09:43:59 PM

OK did the press the button alot waont do it on the stroke or choppers. So i made head in front and no problem. So  i will call next week to M & R and see what they think.

Shane