TSB

screen printing => Equipment => Topic started by: cbjamel on April 17, 2017, 06:02:25 PM

Title: Msp 3130 bulb
Post by: cbjamel on April 17, 2017, 06:02:25 PM

Did i put this right? The little spot look like mercury or ? Or am i upside down.
Thanks,
Shane(https://uploads.tapatalk-cdn.com/20170417/b57e225926daa9aa1629750d9d153cc4.jpg)(https://uploads.tapatalk-cdn.com/20170417/874cc3d5bbbeb13d8e28b9426ae1d850.jpg)

Sent from my SAMSUNG-SM-G890A using Tapatalk

Title: Re: Msp 3130 bulb
Post by: RonH on April 17, 2017, 07:30:09 PM

The second photo is correct, the nipple should be at the top.

Ron Hopkins
NuArc Sales Mgr
M&R Sales and Service Co.

Title: Re: Msp 3130 bulb
Post by: cbjamel on April 17, 2017, 07:40:51 PM

Ron i have on bottom. Will that make a big difference?
Thanks,
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk

Title: Re: Msp 3130 bulb
Post by: Orion on April 17, 2017, 10:04:38 PM

I would go with what Ron has stated, nipple at the top. You can research on-line for yourself. I found this....

http://www.advancedaquarist.com/2002/3/review (http://www.advancedaquarist.com/2002/3/review)

Title: Re: Msp 3130 bulb
Post by: cbjamel on April 17, 2017, 10:13:08 PM

I thought i read the install directions. Guess i read wrong or understood wrong. I will change tomorrow.

Shane

Title: Re: Msp 3130 bulb
Post by: cbjamel on April 18, 2017, 06:34:51 PM

I changed it wow what a difference. I miss read the instructions. 170 ltu to 110 ltu with phu 2/1 coat thin side on 156 yellow mesh.

Thanks for the help!
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk

Title: Re: Msp 3130 bulb
Post by: RonH on April 18, 2017, 06:48:22 PM

yes, the nipple is where the lamp is sealed after the ingredients are put into the lamp and it should be on the top for this type of unit.

Ron Hopkins
NuArc Sales Mgr
M&R Sales and Service