TSB

Artist => General Art Discussions => Topic started by: DCSP John on May 26, 2016, 02:32:02 PM

Title: Advice on printing this one... 5/26
Post by: DCSP John on May 26, 2016, 02:32:02 PM

Hi Everyone...

Any suggestions on how to sep this one? Great vector provided by customer.
10 station press.. 8 printable heads. Two flashes.
My in house art guy is gone for the holiday, and I need to price this one out.
Figured I would reach out to the board first...

Thanks  - John

Title: Re: Advice on printing this one... 5/26
Post by: bimmridder on May 26, 2016, 02:40:34 PM

Don't know how to sep it, but I'd love to have one when it's done!!!

Title: Re: Advice on printing this one... 5/26
Post by: tonypep on May 26, 2016, 02:42:29 PM

4 clr process DC w/spots.......that's a lot of plasma to be touching. Or a DC/UB with plastisol 4clr pro and spots

Title: Re: Advice on printing this one... 5/26
Post by: DCSP John on May 26, 2016, 02:55:15 PM

Hmm..  Maybe outside of my comfort zone on this one.
We run alot of SIM PRO, but no 4CP on darks....

John

Title: Re: Advice on printing this one... 5/26
Post by: blue moon on May 26, 2016, 05:11:01 PM

7 colors in sim process would get it done. It would not be 100%, but close. if you have 8 colors, even better!

pierre

Title: Re: Advice on printing this one... 5/26
Post by: Sbrem on May 27, 2016, 11:13:35 AM

I'd look at 8 colors sim process, you don't get every color as a solid spot, but who can afford that anyway, even if you had the 18 color press? l would think DC underbase.

Steve