TSB

Computers and Software => Raster and Vector Manipulation Programs, and How to Do Stuff in Them. => Topic started by: Frog on November 19, 2015, 05:22:18 PM

Title: CorelDRAW weirdness when mirrored
Post by: Frog on November 19, 2015, 05:22:18 PM

I'm talking about the fade in the sky changing when the whole image is horizontally mirrored.
Fortunately I could work around this aberration in the output stage (where it mirrors correctly), but why would it do this?

Title: Re: CorelDRAW weirdness when mirrored
Post by: ftembroidery on November 20, 2015, 12:31:13 PM

I have had instances with Draw/Illy/PPaint/PShop looking "wrong" or "weird" on the screen.  I have found that if I "minimize" the display and then "restore" it, things appear as they should.  I suspect it's a lack of memory or RAM.  Does your weird display PRINT properly?

Title: Re: CorelDRAW weirdness when mirrored
Post by: Frog on November 20, 2015, 12:42:58 PM

Quote from: ftembroidery on November 20, 2015, 12:31:13 PM

I have had instances with Draw/Illy/PPaint/PShop looking "wrong" or "weird" on the screen.  I have found that if I "minimize" the display and then "restore" it, things appear as they should.  I suspect it's a lack of memory or RAM.  Does your weird display PRINT properly?

Not in this case. The only solution I found was sending it to the printer right-reading, and mirroring the output