TSB

Embroidery => General Embroidery => Topic started by: Flash Ink on November 09, 2015, 06:23:43 PM

Title: SWF Color Changing Solenoid Problem
Post by: Flash Ink on November 09, 2015, 06:23:43 PM

I have a 601-c SWF machine. Ran great for a while then started having problems. We have replaced a bunch of things on it and now we are at an impasse. The jump solenoid will always stay extended now and gets very hot. We replaced the upper joint board and the jump solenoid as advised by SWF and 2 other techs, now it will not work. Any advice would be great.

Title: Re: SWF Color Changing Solenoid Problem
Post by: Audifox on November 10, 2015, 01:35:00 PM

Not sure if that particular problem is listed here, but it's a place to start.
http://embroiderytrainingvideos.com/Table/SWF-Embroidery-Machine-Support/ (http://embroiderytrainingvideos.com/Table/SWF-Embroidery-Machine-Support/)