TSB

screen printing => Equipment => Topic started by: canucklehead on September 25, 2015, 10:45:50 AM

Title: Anyone with a RayPaul Cureair Dryer out there?
Post by: canucklehead on September 25, 2015, 10:45:50 AM

We recently purchased a used RayPaul Cureair and it was shipped to us without the lower 5Hp recirc motor. I'm wondering if there's anyone out there that can pull a model/serial number off of theirs so's I can order a new one. I suppose the RPM and frame type would be handy numbers as well off the specs plate.

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: GKitson on September 25, 2015, 10:49:38 AM

M&R should be able to help you with this,

I believe they acquired Ray-Paul some years ago.

~Kitson

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: 244 on September 25, 2015, 10:54:23 AM

Quote from: canucklehead on September 25, 2015, 10:45:50 AM

We recently purchased a used RayPaul Cureair and it was shipped to us without the lower 5Hp recirc motor. I'm wondering if there's anyone out there that can pull a model/serial number off of theirs so's I can order a new one. I suppose the RPM and frame type would be handy numbers as well off the specs plate.

its the same motor we use on our Sprints that use 5hp. Only need to know single or 3 phase

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: canucklehead on September 25, 2015, 11:08:17 AM

Oh, that's super!

this particular unit is 3 phase.

Model: 60121B8-81R
Serial: 37610793
3 phase/ 68.9 Amps

It was shipped without the mounting plate and pulley guard as well, but I think I can fab some stuff up at the shop. Any idea what size/type v-belt would go with that? 

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: californiadreamin on September 25, 2015, 11:18:56 AM

Quote from: canucklehead on September 25, 2015, 10:45:50 AM

We recently purchased a used RayPaul Cureair and it was shipped to us without the lower 5Hp recirc motor. I'm wondering if there's anyone out there that can pull a model/serial number off of theirs so's I can order a new one. I suppose the RPM and frame type would be handy numbers as well off the specs plate.

Exact Replacement Is :   GE  5K184BD205A
                                     5 HP    184T Frame
                                     1725 RPM
                                     230/460 V
                                     3 Phase
Any motor that matches these specs will do.
I hope this helps.

winston

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: canucklehead on September 25, 2015, 11:24:45 AM

Thanks Winston. And thanks everyone!

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: Zelko-4-EVA on September 25, 2015, 01:57:33 PM

heres a pic of our cureair motor

i dont know the pulley diameters though...

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: GKitson on September 25, 2015, 02:06:15 PM

Another Ray Paul motor plate

Title: Re: Anyone with a RayPaul Cureair Dryer out there?
Post by: canucklehead on September 25, 2015, 05:51:51 PM

Thanks again everyone. I wish I got on here earlier to sort this out. There's no shortage of knowledge and help in this forum. I hope I can give something back in the near future.

Cheers!