TSB

Computers and Software => Computers and Software - General => Topic started by: sportsshoppe on July 23, 2015, 10:07:48 AM

Title: What ink jet do you use?
Post by: sportsshoppe on July 23, 2015, 10:07:48 AM

Well my Epson died and looking at a replacement..... looking for suggestions and feed back
Thanks

Title: Re: What ink jet do you use?
Post by: mk162 on July 23, 2015, 10:26:19 AM

i've got a 4900 with a bulk system(but I use carts from accuink) 1 roll of 13" film and another partial on the machine with Filmaker v3 I'd sell for $500.  It was rebuilt 2 years ago.

You will probably have to pay Filmaker $75 in support fees to activate the software on a different computer.

Title: Re: What ink jet do you use?
Post by: sportsshoppe on July 23, 2015, 11:03:29 AM

What is the maximum width of the print?MK

Title: Re: What ink jet do you use?
Post by: mk162 on July 23, 2015, 11:08:14 AM

i think 17", at least that is the film size I've used before.  for us 13" covered almost everything.

Title: Re: What ink jet do you use?
Post by: mk162 on July 23, 2015, 11:15:54 AM

it's a 4800, my bad.  Not sure what a difference that makes.

Title: Re: What ink jet do you use?
Post by: Frog on July 23, 2015, 11:47:12 AM

Quote from: mk162 on July 23, 2015, 11:15:54 AM

it's a 4800, my bad.  Not sure what a difference that makes.

Supposed to be a good difference. According to posts here, the 4900 was not an improvement!