TSB
Embroidery => General Embroidery => Topic started by: Daniel on May 30, 2015, 03:43:12 PM
-
I recently bought an SWF single head embroidery mechine and the yellow shoe clamp of of "sewmanyparts".
I am trying for a month now to embroidery on shoes and became totaly desperate everything i tried didnt work, it seemed that the needle cant catch the bobbin, i used the "KK" needles and put oil on it and it seemed to work for few seconds and than it stoped again.
Please help me :(
-
most of the "specialty" embroidery hooping devices are like fishing lures...designed to catch more fisherman than fish!
If they work at all it is a labor of pain and retrying.
Here are some tips that may help.
Slow the machine down to 400 to 500 rpm for starters.
Use the largest needle like a 80/12 sharp point
Increase your upper and bobbin tension a little more than what you would us for normal flats
MAKE SURE THE SNEAKER IS TIGHTLY HOOPED, NO WRINKLES, SLOP ETC.
MAKE SURE THE UNDERSIDE OF THE SNEAKER IS SITTING SOLIDLY ON THE NEEDLE PLATE
If the item is not a sneaker or sneaker like FORGET IT you can't embroider shoes
JOIN THIS GROUP SWF owners group https://groups.yahoo.com/neo/groups/SWFOwners/info
mooseman