TSB

Embroidery => General Embroidery => Topic started by: travis.hoyme on May 14, 2015, 06:36:40 AM

Title: Machine Tech
Post by: travis.hoyme on May 14, 2015, 06:36:40 AM

Does anyone know of a good tech for Ohio?  We have Brother/Barudan machines.  Looking for someone that has reasonable prices.


Sent from my iPhone using Tapatalk

Title: Re: Machine Tech
Post by: mk162 on May 14, 2015, 08:46:38 AM

Jay Pack
276-791-0778

He's in Bristol VA....you will be hard pressed to find a better tech.

Title: Re: Machine Tech
Post by: GraphicDisorder on May 14, 2015, 08:48:05 AM

Quote from: mk162 on May 14, 2015, 08:46:38 AM

Jay Pack
276-791-0778

He's in Bristol VA....you will be hard pressed to find a better tech.

Was just about to post this.  Not sure he will go as far as Ohio, but I assure you if he does your machines will never run as good as they do with him.  He's reasonable as well.

Title: Re: Machine Tech
Post by: mk162 on May 14, 2015, 08:52:56 AM

heck, he comes here to the ATL...just with a steady supply of Dr. Enuf.

Title: Re: Machine Tech
Post by: GraphicDisorder on May 14, 2015, 08:56:34 AM

Quote from: mk162 on May 14, 2015, 08:52:56 AM

heck, he comes here to the ATL...just with a steady supply of Dr. Enuf.

He probably would do Ohio.  Id suggest the original poster check for sure.

Title: Re: Machine Tech
Post by: Denis Kolar on May 14, 2015, 09:40:48 AM

I  had Lonnie Gossett from New Philly, Ohio work on my Tajima and Toyota single heads.
Pretty good guy. Not sure if he can work on Barudan.

See the list here. http://embroiderytrainingvideos.com/Technicians/Embroidery-Machine-and-DTG-Technicians/ (http://embroiderytrainingvideos.com/Technicians/Embroidery-Machine-and-DTG-Technicians/)