TSB
screen printing => Equipment => DIY - From master engineered marvels to cobbled together jury-rigged or Jerry-built junk! => Topic started by: stitches4815 on January 24, 2015, 12:16:34 PM
-
I don't know how many of you do repairs on your embroidery machines. If it looks like something I can do I will make the necessary repairs. Last weekend I had the wonderful task of replacing a needle bar reciprocator. After reviewing the technical drawings in the book and watching a YouTube video I was set to go. I start tearing the head down when a screw popped out, hitting the table top and then the floor. Where it bounced to nobody knows. Now I am on the floor with a magnet looking for this damn screw, hitting my head and cussing. After about 10mins I find it. I get back to the task at hand when I drop another screw..........SONOFABITCH!!! After I find the screw I get thinking there has to be a simple way to prevent dropped screws from hitting the floor. I put backing in a jacket back and put the jacket back on the machine. The next screw that dropped fell into the jacket back. No more crawling around looking for dropped screws. Another plus was that I put the tools in the jacket back and they were close. If I was smart I would have thought of doing this from the start to avoid all aggravation.
-
I feel your pain, I have that $#&*^)(#@!@ problem all the time. I constantly get small screws and such that jump out of my fingers or get knocked off a no so magnetized screw driver or spit out of a pair of needle nose pliers.
We got to the point where we lay down a plush bath towel to save me from bitchin and bumping my head.
PS I have zero hair up there so I get no early warning and make a shirt load of blue air ::).
mooseman
-
Otherwise good job!
I'd hate to try to replace a reciprocator.
-
Mooseman, I have hair up there but it still hurts when I biff my melon on a cross beam. Gary, replacing the reciprocator was actually easy.
-
Mooseman, I have hair up there but it still hurts when I biff my melon on a cross beam. Gary, replacing the reciprocator was actually easy.
Absolutely it hurts just the same, taking a shot to the noggin hurts like hell and is only secondary, for me anyway, to slipping off the pedals of my bike ::) I find it truly amazing how much chrome I can save from my dome by simply wearing a beanie. Not so much to soften the blow but to actually allow that one nanosecond of early warning and retard my motion.
the many head shots I have taken really explain a lot about me :P
mooseman
-
Why not go with clipless pedals and shoes?
Even as an extremely casual rider I LOVE my clipless pedals!
-
Why not go with clipless pedals and shoes?
Even as an extremely casual rider I LOVE my clipless pedals!
actually I gave up bike riding when I lost the possibility of ever singing in a baritone voice ;)
mooseman
-
that is really smart...