TSB
screen printing => Equipment => Topic started by: Shanarchy on September 01, 2011, 01:33:46 PM
-
I would like to publicly thank Brian (binkspot) and Robert Barnes for going out of their way to help me with the issues I was having with my press.
Robert called me on Sunday and sent Brian, who is a tech AND also a printer, to my shop yesterday. Brian spent the day at my shop correctly installing my press. The issues that he found which were not done correctly by the original tech, were the pallet arms were not aligned, the pallets were not leveled and the off contact was not set. Brian took care of all of this while also checking all other aspects of the press to ensure proper set up. After a long day here, he made sure I went over everything on the press with him there to be sure I was completely happy and answer any questions I may have had.
Not only is my press now properly set up, but by while hanging over Brian's shoulder I feel I learned a lot. I feel much more confident in knowing the right way to make an adjustment if need be.
If anyone needs tech service I highly recommend Brain (binkspot).
Now for the fun part. Robert generously picked up the tab of the tech visit.
Before anyone starts thinking anything, we had a conversation beforehand, and this was not an attempt for him to buy my allegiance. Nor am I, or shall I be a paid spokesperson for him. He ensured me that he was doing it because we have always got along great and he wanted to help me out. I understand and respect that this is a norwb zone. But I would like to give credit where credit is due. I don't always agree with his internet actions, but my real life dealings with him have always been great. So for that, I publicly send a sincere thank you his way.
*Please respect this post mentioning 'he who shall not be named' and keep and potential replies within the true nature of this forum.
-
I am glad you got it all straightened out. You should try and get a refund from the other tech and kick some of that to asdf. The other tech was clearly a dipsh!t and should have done it right.
Did you pay with a CC?
-
That was very nice of them to do that for you. See, isn't our industry so much better when the big guys are trying to outdo each other in the "helping others" category instead of trying to bury the other one?
-
That was very nice of them to do that for you. See, isn't our industry so much better when the big guys are trying to outdo each other in the "helping others" category instead of trying to bury the other one?
Agreed!!!!!!
-
I don't think I've ever read a comment claiming Mister Mxyzptlk was not competent. Some regret the loss of his potential to significantly contribute positively to all these forums due to his "internet antics" as you charitably put it. Bill Hood is another, although not quite in the same league.
-
Shane I thinking your problem was the pallets at most glad your up and running now....NOW!!!! go and print some dam shirts dude before I call Sam and have him and Homer come over and kick you in the nuts!!! ;D
Darryl
-
i puked a little in my mouth when i read that name....... :o
-
Shane I thinking your problem was the pallets at most glad your up and running now....NOW!!!! go and print some dam shirts dude before I call Sam and have him and Homer come over and kick you in the nuts!!! ;D
Darryl
Will do! I'll keep you updated. I may bother you with a couple of questions in the future as we both have the same press. Your's is all air also, right?
-
glad you're up and running Shane, good luck, and go do some pain free printing...
Steve
-
Shane I thinking your problem was the pallets at most glad your up and running now....NOW!!!! go and print some dam shirts dude before I call Sam and have him and Homer come over and kick you in the nuts!!! ;D
Darryl
Will do! I'll keep you updated. I may bother you with a couple of questions in the future as we both have the same press. Your's is all air also, right?
Yep all air just a little newer model , but still the same, call anytime you like
Darryl
-
Shane, I'm glad to hear you're running. I guess it doesn't really matter (to us) how and who got you there. I'd agree you ought to go after the "tech" that did the original install for you. Certainly let whomever suggested him to you know so they are aware of his lack of quality workmanship. Now you get to learn all the joys of running an auto!!!
-
This will come back to haunt you, send him a check. :o
With that being said, glad you got it fixed. Sounds like you were pretty down about it.
-
Jesterapparel couldn't help yourself huh!!! in this hold thread you had to be negative, and I guess you'll be the one to wait and say I told you so.
Darryl
-
The issues that he found which were not done correctly by the original tech, were the pallet arms were not aligned, the pallets were not leveled and the off contact was not set
Jesus effing christ. Are you serious? What did homeboy do, bolt the thing together, plug it in, hook up the air and split?
Glad you got a skilled tech in there. I would definitely get your $ back from that clown that did the prior 'install'. This is basic, basic stuff even for a manual press.
-
Darryl, I definitely will. What is the ideal time to get ahold of you?
Thanks Dave! I'm finally glad to be back on track with it. I let Anatol know the independent tech they recommended did not do a good job. Hopefully this will help the next guy out there.
Jester, It was really building up. I was probably a little over emotional at the time of the original post, but it was definitely getting my spirits down.
Zoo, pretty much. Electric, air, and a couple of other things. But definitely did not dial it in to be ready to go. It would be nice if there was a review list for independent techs in the field so you could know before you spend your money weather or not they are reliable.
-
I get in the office around 8:00am central time zone here gives me an hour to setup and read my paper and bullsh!t, by 9:00 I,m printing. Anytime though if you need a quick answer if I have one LOL
Darryl
-
Glad to hear you are up and running.... ;D
Kudos to Brian and Robert for helping you out!!
-
Glad to hear you are up and running.... ;D
Kudos to Brian and Robert for helping you out!!
Thanks Brannon. And thanks again for the offer to call you for help. I am going to keep your number and if I need any Anatol items I will give you a shout as I see you sell Anatol equipment.
-
Thanks Brannon. And thanks again for the offer to call you for help. I am going to keep your number and if I need any Anatol items I will give you a shout as I see you sell Anatol equipment.
Call any time... I try to help when I can ;)
-
I don't think I've ever read a comment claiming Mister Mxyzptlk was not competent. Some regret the loss of his potential to significantly contribute positively to all these forums due to his "internet antics" as you charitably put it. Bill Hood is another, although not quite in the same league.
Understand that I have absolutely no problem with Shane giving thanks where thanks are due.
My only distinction is that, on this "press angel", my feelings, and I believe those of my partners and probably many of the members go far deeper than "internet antics"
End of that subject.
-
Jesterapparel couldn't help yourself huh!!! in this hold thread you had to be negative, and I guess you'll be the one to wait and say I told you so.
Darryl
No, I would have told inkman that if that was the case. Just trying to help him out with a little advise.
Ask the guy who got a free web cam from Robert (I think his name was terry or something), once he started disagreeing with him all of a sudden Robert claimed he stole it.
Just don't want this happening to him.
-
Jesterapparel couldn't help yourself huh!!! in this hold thread you had to be negative, and I guess you'll be the one to wait and say I told you so.
Darryl
No, I would have told inkman that if that was the case. Just trying to help him out with a little advise.
Ask the guy who got a free web cam from Robert (I think his name was terry or something), once he started disagreeing with him all of a sudden Robert claimed he stole it.
Just don't want this happening to him.
Jester,
I sincerely appreciate your advice. But I in no way want this to turn in to a negative thread. We all know things can spiral quickly regarding this subject. Feel free to PM me (or even call me). I know your intentions are good.
-
Shane, I won't pull the plug on this (at least yet) , but whatever your intentions, threads are dynamic, and you lose control of anything but your own posts.
You brought up a guy who's a real sore spot with a lot of folks, and on this forum, probably a higher percentage than other places.
Like the folks who bring up other forums, one can't open the bottle, let the genie out, and then expect him to follow your instructions (or even your desires) let alone climb back in on his own. That takes a moderator.
-
Like I said, I would try and get a refund from the other tech. If you do, kick that over to asdf, I HATE feeling like I owe somebody something. Doesn't matter who it is.