TSB

screen printing => General Screen Printing => Topic started by: ericheartsu on February 17, 2014, 03:29:01 PM

Title: for those of you that use neoprene under your zip up hoodies
Post by: ericheartsu on February 17, 2014, 03:29:01 PM

how do you get the sweatshirts to adhere to it?

Title: Re: for those of you that use neoprene under your zip up hoodies
Post by: mimosatexas on February 17, 2014, 04:02:42 PM

pallet tape with standard glue?  I haven't printed a seam print in a while, but when I did it was over some foam from joann's with pallet tape on top.  worked well enough.

Title: Re: for those of you that use neoprene under your zip up hoodies
Post by: screenprintguy on February 17, 2014, 04:10:53 PM

Yup pallet tape on top. Actually we tried Danny G's technique, bought a roll of 3/8" bubble sheeting from Uline, spray tacked that to pallet tape covered pallets, trimmed the edges, then covered that with pallet tape using spray glue both on the top of the bubble sheeting and the pallet tape glue side, cut the center notch and rocked out 500 zipper hoodies with a 4 color discharge print, 1 flash involved in the mix too and didn't hurt the bubble sheeting at all. It all peeled off the original pallet tape that was covering the pallet surface nice and easy in one sheet too.

Title: Re: for those of you that use neoprene under your zip up hoodies
Post by: ZooCity on February 17, 2014, 11:21:52 PM

Quote from: mimosatexas on February 17, 2014, 04:02:42 PM

pallet tape with standard glue? 

yep. with web tack.