Author Topic: Foam Fingers etc (Read 969 times)

Ryan · « **on:** November 18, 2013, 02:14:16 PM »

Quick look couldn't find anything so....has anyone printed these? how do you do it? what kind of ink. normally i would let an ASI company handle but its a rush...Surprise! so trying to see if I could print these myself. any help would be much appreciated as I need to order today in order to get the blanks here in time to do them.
~ryan

royster13 · « **Reply #1 on:** November 18, 2013, 02:50:59 PM »

Phone Nazdar.....They have a great knowledge of printing on almost anything....

ericheartsu · « **Reply #2 on:** November 18, 2013, 02:55:32 PM »

Would also call Nazdar!

Rob Coleman · « **Reply #3 on:** November 19, 2013, 02:02:53 PM »

You can generally print a standard plastisol on these. Foam should be able to take the heat. Even if you have to turn the heat down a bit, you are okay to undercure a bit since these wont be washed. Really depends upon the content of the foam. Do you have one to test?

Ymmv as they say!

Sent from my iPad using Tapatalk 2

tonypep · « **Reply #4 on:** November 19, 2013, 02:15:29 PM »

A LCA added to plastisol would work.
Miley might still have some props you could borrow

Ryan · « **Reply #5 on:** November 19, 2013, 03:10:32 PM »

I passed on this round. Wouldn't have gotten the fingers until Friday and they would have needed them on Friday so I really didn't want to scramble for this time around.

Miley sent me a personal autographed one, so that was nice of her!!!

News:

Author Topic: Foam Fingers etc (Read 969 times)

Ryan

Foam Fingers etc

royster13

Re: Foam Fingers etc

ericheartsu

Re: Foam Fingers etc

Rob Coleman

Re: Foam Fingers etc

tonypep

Re: Foam Fingers etc

Ryan

Re: Foam Fingers etc