Epson registration off

[3Deep]

My epson 3000 is F'ing my film up, for some reason the film don't register to each other, I think it has something to do with how the film is feeding in...any one had this problem and what did you do to fix it.  I thought about trying to change the paper roller things that pull the film in, looks like it pulls some sheets in kind of side ways, I only feed 1 sheet at a time.

Darryl

[ebscreen]

All Epson sheet feeders go south eventually. You can get some rubber renew to freshen them up, but no
guarantees.

For the meantime, single feed sheets though the back.

[Frog]

This also assumes that these are all the same type of film, all being fed with the image in the same orientation.

[3Deep]

Yes they are Frog, the film feeder is pulling the film crazy...if it ain't one thing it's another

Darryl

[Mark @ Hurricane Printing]

i feed my epson 3000 from the back, one sheet at a time...13" x 18" sheets.

But since i landed a liberator gs618 thermal imagesetter the epson is collecting dust. (aaahhhhh..that felt so good to say haha)

[Rockers]

Try extending your crop marks around the whole image area, or draw a box around the image.