« previous next »
Pages: [1]   Go Down

Author Topic: table lock pin on a diamondback  (Read 2253 times)

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
table lock pin on a diamondback
« on: October 15, 2013, 05:54:35 PM »
I have a diamondback/all air. There is a pin that is used to lock the pallets in place. it drops out of the way if you want to spin the tables freely. Today it seems like the pin is not dropping far enough away so when the I spin the pallets by hand the tip of the pink is getting rubbed as the arms go by. Does anyone know if that is adjustable? Am I in for something worse to happen soon?
Thanks,
matt
« Last Edit: October 15, 2013, 05:57:00 PM by balloonguy »
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: taple lock pin on a diamondback
« Reply #1 on: October 15, 2013, 05:57:38 PM »
Quote from: balloonguy on October 15, 2013, 05:54:35 PM
I have a diamondback/all air. There is a pin that is used to lock the pallets in place. it drops out of the way if you want to spin the tables freely. Today it seems like the pin is not dropping far enough away so when the I spin the pallets by hand the tip of the pink is getting rubbed as the arms go by. Does anyone know if that is adjustable? Am I in for something worse to happen soon?
Thanks,
matt
It is adjustable. Not a big deal but you should call our service department and they will direct you on how to adjust properly.
Logged
Rich Hoffman

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: table lock pin on a diamondback
« Reply #2 on: October 15, 2013, 06:05:26 PM »
Thanks for getting back so quickly. Are they in tonight? I am headed back after dinner. I have a few things to finish up.
Matt
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: table lock pin on a diamondback
« Reply #3 on: October 15, 2013, 08:54:23 PM »
Quote from: balloonguy on October 15, 2013, 06:05:26 PM
Thanks for getting back so quickly. Are they in tonight? I am headed back after dinner. I have a few things to finish up.
Matt
there is an after hour call if you are down but if it's just for directions on a minor adjustment it would be better during normal business hours or you can text me a number and I will call and help.
Logged
Rich Hoffman

Offline balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 984
Re: table lock pin on a diamondback
« Reply #4 on: October 15, 2013, 09:21:36 PM »
I will call in the morning.
Thank you for your attention to this. The offer to call tonight is appreciated but not necessary.
Matt
Logged
When you dig grave will you make it shallow so that I can feel the rain?

Offline Admiral

  • Hero Member
  • *****
  • Posts: 890
Re: table lock pin on a diamondback
« Reply #5 on: October 16, 2013, 11:15:52 AM »
Easy adjustment, takes a large allen wrench and moving the pin down slightly then tightening back up very tight.  I assume this is already fixed though.
Logged
Pages: [1]   Go Up
« previous next »