« previous next »
Pages: [1]   Go Down

Author Topic: white ink on a navy/navy foam faced trucker hats  (Read 1507 times)

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
white ink on a navy/navy foam faced trucker hats
« on: July 19, 2011, 12:21:14 AM »
I have a small job 12 solid navy trucker hats, the foam faced style with white ink. The way I'm set up for hats is I print onto transfer paper and heat press them. If Direct printing I would use alittle puff but since these are heat pressed, I don't think that'll help too much.
« Last Edit: July 19, 2011, 12:24:54 AM by endless ink printing »
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: white ink on a navy/navy foam faced trucker hats
« Reply #1 on: July 19, 2011, 12:34:27 AM »
I used to do a lot of these, and I would print my transfers through a pretty low mesh screen like a 110 or even as coarse as an 86.
At any rate, use the puff it you want, but remember to use a low bleed white.


Logged
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: white ink on a navy/navy foam faced trucker hats
« Reply #2 on: July 19, 2011, 09:05:56 AM »
110 mesh, low bleed white, like Andy says. Light to medium pressure on the hat press too...

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Shawn (EIP)

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1356
Re: white ink on a navy/navy foam faced trucker hats
« Reply #3 on: July 19, 2011, 09:10:26 AM »
Cool thanks, I'll let you know how they turn out
Logged
Pages: [1]   Go Up
« previous next »