Author Topic: High Solids Water Base Printing by Ray Smith from Wilflex  (Read 1144 times)

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
High Solids Water Base Printing by Ray Smith from Wilflex
« on: September 06, 2013, 02:32:13 PM »
Great Article on High Solids Water Base Printing from Ray Smith at PolyOne Wiflex. Check it out! http://emfl.us/0NFd
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com


Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: High Solids Water Base Printing by Ray Smith from Wilflex
« Reply #1 on: September 06, 2013, 03:28:06 PM »
Hey that's timely, I was just getting to work on getting HSA into our shop.  Would you be able to give me a call or email sometime Rob? I'll PM you my info.

Offline Rob Coleman

  • Sr. Member
  • ****
  • Posts: 359
Re: High Solids Water Base Printing by Ray Smith from Wilflex
« Reply #2 on: September 06, 2013, 04:09:39 PM »
Hey that's timely, I was just getting to work on getting HSA into our shop.  Would you be able to give me a call or email sometime Rob? I'll PM you my info.

Replied via email with LOTS of info.  Let's circle back next week after you get a chance to digest it!   ;D
Rob Coleman | Vice President
Textile Business Unit | Nazdar SourceOne | sourceone.nazdar.com
(800) 677-4657 ext. 3708 | Cell (678) 230-4463
rcoleman@nazdar.com

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5679
Re: High Solids Water Base Printing by Ray Smith from Wilflex
« Reply #3 on: September 09, 2013, 08:47:50 AM »
Funny it seems like not too long ago you couldn't get Ray (or Mark Gervais) to even look at WB inks. Times change!
I truly wish them the best they are a huge asset to the industry. It just makes me smile when I look back on how everyone told me discharge would never catch on. Color me crazy.