Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
"He who marches out of step hears another drum." ~ Ken Kesey
Home
Forum
Help
Search
Gallery
Articles
Advertise
Login
Register
TSB
»
screen printing
»
Waterbase and Discharge
»
The dry chunk mixing white problem. (CCI)
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: The dry chunk mixing white problem. (CCI) (Read 2246 times)
kingscreen
Gonzo Member
Posts: 1161
The dry chunk mixing white problem. (CCI)
«
on:
September 03, 2013, 01:36:45 PM »
Many of us are aware and frustrated with the white chunk issue with CCI's Mixing White.
Has anyone found a solution? My rep seems to be at a loss besides bringing us more and more replacement bottles. We've tried using 50/50 DBase/DWhite in place but mixing colors is a challenge. Anyone have input or a solution?
Logged
Scott Garnett
King Screen
noortrd
Sr. Member
Posts: 323
Re: The dry chunk mixing white problem. (CCI)
«
Reply #1 on:
September 04, 2013, 12:23:45 PM »
Add emulsifier to mix.
Logged
Inkworks
!!!
Gonzo Member
Posts: 1761
Pad&Screenprinter
Re: The dry chunk mixing white problem. (CCI)
«
Reply #2 on:
September 04, 2013, 07:55:11 PM »
I've had some success mixing the pigment with a bit of water before adding it to the base.
Logged
Wishin' I was Fishin'
ebscreen
!!!
Gonzo Member
Posts: 4277
Re: The dry chunk mixing white problem. (CCI)
«
Reply #3 on:
September 04, 2013, 08:42:47 PM »
Try a blade type homogenizer and let me know how it works because I'm thinking
of getting one.
We currently filter most of our mixes, though white tends to not pose a problem.
Logged
East Bay Screenprint
tonypep
Ludicrous Speed Member
Posts: 5678
Re: The dry chunk mixing white problem. (CCI)
«
Reply #4 on:
September 05, 2013, 07:11:08 AM »
Simple.....don't use it. I'm assuming this is a PC. Can't give too many specifics but most ink companys formulas are flawed. There are work arounds that are amazingly simple but some things are best discovered on your own.
Logged
tpepitone@jnjapparel.net
ebscreen
!!!
Gonzo Member
Posts: 4277
Re: The dry chunk mixing white problem. (CCI)
«
Reply #5 on:
September 05, 2013, 12:55:24 PM »
Rutland tech told me that all of their WB formulas are just converted from their plastisol,
and recommended that the white typically be left out. Not that you needed validation or anything Tony.
Logged
East Bay Screenprint
ZooCity
Gonzo Member
Posts: 4914
Re: The dry chunk mixing white problem. (CCI)
«
Reply #6 on:
September 05, 2013, 03:01:04 PM »
It hasn't been horrible for us but def is the only problem pigment in the set. I think they might just need to tweak their formula for the white pig. I'm guessing there is something that would prevent it clumping up so bad.
We spritz the cap with water, wipe clean after each use and keep it shook up. Also try rinsing out the spout cap. Last off, pour gallons out into quarts or pints when they get a third or half of the way down, less air in there to contribute to drying.
I do like Tony and add white and black last, when it's actually needed. I often just use the d white.
Logged
kingscreen
Gonzo Member
Posts: 1161
Re: The dry chunk mixing white problem. (CCI)
«
Reply #7 on:
September 26, 2013, 04:48:44 PM »
I followed Tony's lead and stopped using it. When mixing white is necessary, I've found a mix of DWhite and Dbase works well.
Logged
Scott Garnett
King Screen
cclaud3
Sr. Member
Posts: 268
Re: The dry chunk mixing white problem. (CCI)
«
Reply #8 on:
February 07, 2014, 04:06:52 PM »
Man wish I would have read this earlier. Had a 4 & a 3 color WB job and the colors that needed white mixing base had clumps that would appear after running a few shirts. Mixed the heck out of those colors too. You can't see them until it's too late.
Logged
screenprintguy
!!!
Gonzo Member
Posts: 1677
Constantly thanking the Lord!
Re: The dry chunk mixing white problem. (CCI)
«
Reply #9 on:
February 07, 2014, 05:37:00 PM »
the fix is, do not use the mixing white, why they even put that in their formula I'll never know. Use d-white in it's place, activated or not, just do about 8% more that they straight white pigment. Thats how we do it, never have a problem.
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803
www.evolutionaryscreenprinting.com
cclaud3
Sr. Member
Posts: 268
Re: The dry chunk mixing white problem. (CCI)
«
Reply #10 on:
February 07, 2014, 05:52:54 PM »
Cool thanks
Logged
sweetts
!!!
Gonzo Member
Posts: 1768
Simplicity is the ultimate sophistication DUH
Re: The dry chunk mixing white problem. (CCI)
«
Reply #11 on:
February 07, 2014, 11:11:24 PM »
I had some success adding the discharge base cutting it by almost half.
Sent from my iPad using Tapatalk
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com
TCT
!!!
Gonzo Member
Posts: 2877
Re: The dry chunk mixing white problem. (CCI)
«
Reply #12 on:
February 08, 2014, 03:11:37 PM »
Replace it with D-white is what we do also.
Logged
Alex
Hopefully I'll never have to grow up and get a real job...
www.twincitytees.com
Print
Pages: [
1
]
Go Up
« previous
next »
TSB
»
screen printing
»
Waterbase and Discharge
»
The dry chunk mixing white problem. (CCI)