« previous next »
Pages: [1]   Go Down

Author Topic: 301 flash temprature and time  (Read 1482 times)

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
301 flash temprature and time
« on: August 29, 2013, 01:17:20 PM »
Anybody tell us that  the flash temprature and time on matsui water based 301 series.
Logged

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: 301 flash temprature and time
« Reply #1 on: August 29, 2013, 01:19:17 PM »
our Reno at 1,000 degrees flashes in 10 seconds, when boards are hot, it will flash 301 between 6-8 seconds, but depends on humidity in the air, mesh count, 1 or two stokes, you'll have to test depending on your conditions
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline noortrd

  • Sr. Member
  • ****
  • Posts: 323
Re: 301 flash temprature and time
« Reply #2 on: August 29, 2013, 01:48:45 PM »
160 degree or 180 degree?.
Logged

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: 301 flash temprature and time
« Reply #3 on: August 29, 2013, 03:33:59 PM »
I'm seeing between 180 and 200, but that's 1 stroke through a 125 mesh, and it's pretty humid today.
Logged
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com
Pages: [1]   Go Up
« previous next »