Computers and Software > RIPs

Have a copy of AccuRIP you're not using

<< < (2/3) > >>

screenxpress:

--- Quote from: Prosperi-Tees on March 10, 2012, 11:41:46 PM ---I've used ghost a couple times where Corel couldn't handle the file separations. It would take forever to print a film opened in ghost and it flew thru it,don't know why though.

Will the XL version of accurip work on a 1400? I've been wanting to upgrade to a 17" printer and along the way found some great deals on 24" printers but don't know if I would ever need that big, 17 for sure 24 idk

--- End quote ---

I'm a bit confused on this where Corel couldn't handle the file separations.  Ghost would never be expected to be a separator.  Ghost takes single color postscript files (from Corel, PS, or AI) and handles the conversion to print the halftone image.

Did I misread something?

If it took forever to print a film from Ghost, I suspect there are some settings that need improvement.  GhostGum is the actual application the is the print mechanism and GhostScript is used behind the scenes and never referenced directly.

Prosperi-Tees:
Well I had a file with a crazy font that Corel did not like, would take forever to load and when I went to print it would take forever in Corel. I mean the printer would print a couple passes and wait for a few minutes and do a couple more passes.

When I opened in Ghostscript the file opened immediatly and printed normally. I did not understand it.

screenxpress:

I do know Corel will bog down with an excessive number of nodes and will slow (or stop) print. 

But Corel files have a file extension of .cdr and will not open in Ghost (at least mine sure won't) so if you didn't save out the plates as individual postscript (.ps) files to Ghost, I don't understand how Ghost could have printed "normally".

Prosperi-Tees:
I dont remember how I did it, it was a few months ago. I can try and replicate what I did but the file is in my dead laptop.

screenxpress:
Probably not worth the effort. 

I was just trying to clear things up should anyone be reading down the posts and comes away thinking that Ghost is difficult to use.  There is a little learning curve that I've tried to skip with a writeup I made and once the few setting are in place, it's usually pretty easy to use for printing halftones, when needed.

I know some of the 'pay' RIPS supposedly do more in the area of laying down heavier deposits of ink, but I have no complaints from my HP9800 for density.  At least not using Fixxons Film anyway.  I've used another name brand film and when you hold both to the light the Fixxons beats it hands down.

Navigation

[0] Message Index

[#] Next page

[*] Previous page