Author Topic: try this with your epson 3000  (Read 1810 times)

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
try this with your epson 3000
« on: July 07, 2011, 07:43:26 AM »
when this adapts to tee shirts we are done!!!!!!
mooseman


3D Printer
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: try this with your epson 3000
« Reply #1 on: July 07, 2011, 09:21:21 AM »
very cool! Being able to do the moving parts is pretty impressive.

here's one on ebay:


http://cgi.ebay.com/Z-Printer-310-Prototyping-Sample-Maker-3D-System-/370510740708#vi-content

 
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline JayzTeez

  • !!!
  • Sr. Member
  • ****
  • Posts: 373
  • Manual Screen Printer
Re: try this with your epson 3000
« Reply #2 on: July 07, 2011, 09:31:47 AM »
to cool.
Jayz Teez Screen Printing
Houtzdale, PA.

Offline Fresh Baked Printing

  • Hero Member
  • *****
  • Posts: 755
  • "Tattoo Free Since 1965"
Re: try this with your epson 3000
« Reply #3 on: July 07, 2011, 10:11:18 AM »
I wonder how much the consumables are? I wonder if the're temperamental like a DTG printer?
A 3D printer but DTG still isn't quite there yet.
50% of the time I'm 100% right.
http://www.spiffylab.com

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: try this with your epson 3000
« Reply #4 on: July 07, 2011, 10:53:20 AM »
DTG printers are not temperamental...unless you get an epson based one.

I just turned 70,000 prints on ours and I've replaced 1 printhead and I've had maybe 1 day of downtime.  Not bad in 5 years.  I've been running one since 2003 and I can tell you, nothing is more reliable than a Brother GT-541 printer.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: try this with your epson 3000
« Reply #5 on: July 07, 2011, 10:59:44 AM »
These have been around for a while. I used to use one to prototype off road race parts. We actually designed a whole race truck in Solid Works and printed out the whole role cage structure and all of the suspension. It allowed us to see the assembled race truck in a true 3d model before actually building it. We were even able to get the suspension to cycle up and down. Awesome technology for sure.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7856
Re: try this with your epson 3000
« Reply #6 on: July 07, 2011, 11:39:55 AM »
I've seen one that uses layers of paper stacked on top of one another.

There is also one out there that can print human skin.  I say they should incorporate that one with an inkjet and then you can do tattoos at the same time as skin grafts.