Question for the auto guys- what are you indexing at?

[Inkworks]

Maybe a better question would be how many dozen can you load/unload by yourself an hour. I can cruise at 20-30, and if I push it, 35doz./hr. I'd love to see someone loading/unloading 60doz./hr alone for sustained periods of time, I'd like it even more if they worked for me!

[shellyky]

i think i do about 35doz by myself if the design isnt tall.

[mk162]

i cruise at 30-35, I've can run 40-45 in short bursts(maybe an hour or two).  The shirts also have to be pretty well stacked for that.

[Binkspot]

Maintain 30-35 doz ph, best I'v done is 41 but all must be perfect.

[mk162]

i really wish i had a speed indicator on this press.  I think I crested 50 the other day, I was flipping flying, I couldn't count them since I was going so fast it would have broken my stride.

[Ryan]

right around 28-30 dz an hour by myself.

[ScreenFoo]

I like doing 25-35 dozen an hour, that way I have time to pay attention to what I'm doing.

Once I start pushing 40+ alone, I don't have any time to look at what's coming off the press.

[mk162]

you guys care what comes off the press?  In my world if it made the trip around, it's good to go.

[Catnhat]

I have the same press as Rockers.(Diamondback S)  By myself, I usually start about 8 sec. then drop it down to 6 a few doz. in after I get into a rhythm.  Puts it usually somewhere between 29-33 doz./hr depending on design.

[T Shirt Farmer]

i really wish i had a speed indicator on this press.  I think I crested 50 the other day, I was flipping flying, I couldn't count them since I was going so fast it would have broken my stride.

Is that 50 dozen an hour by yourself?

[ebscreen]

I was never able to break about 350/hr alone.

On MHM's you have a foot pedal that you step on if you need the press to wait for your
sorry butt. As soon as you release it indexes. All presses should have this.

[alan802]

I know that on our centurian it would tell me I was running 40dz/hr when I was really running 60+ (not by myself) and then there were times it would tell me I was doing 72dz/hr when I was really only doing 30dz/hr.  Knowing it was on an Anatol that someone was doing 60dz/hr by themselves I really have my doubts as to the accuracy of the built-in production counter. 

[CastleKing]

We try to hit around 80+ dz/hour on long runs.  I've attached last weeks production numbers on 3 presses along with daily set-ups. Dwell times usually 1-2 secs.

[3Deep]

My dryer is slow so I,m at 22 to 26 doz per hour, and my press is set at 2 second index and the if using the flash its at 4 so I,m at 6 second total, with no flash I'm still around 6 I,m at the mercy of my dryer right now.

Darryl

[GraphicDisorder]

We try to hit around 80+ dz/hour on long runs.  I've attached last weeks production numbers on 3 presses along with daily set-ups. Dwell times usually 1-2 secs.

Jesus.