« previous next »
Pages: [1]   Go Down

Author Topic: How to linearize a 4800 printer  (Read 1543 times)

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1093
How to linearize a 4800 printer
« on: June 12, 2013, 08:23:34 PM »
What is required or needed to linearize a 4800 printer with Garment Decorating Supply version of rip (called Quickfilm ie.. Cadlink) version 10. Running 1 ink cart rest are cleaning carts. Rolled film.

Thanks for the feedback, we are trying to improve our printing.

Thanks,
Shane
Creations By Ja-Mel
cbjamel at msn.com
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: How to linearize a 4800 printer
« Reply #1 on: June 12, 2013, 08:35:40 PM »
remind me tomorrow and I'll send you the file to print and send back for the readings.
once read, I'll give you the numbers to put in the adjustment curve (not sure where that is in the older version of the software, but it should be there somewhere). This will get you within 2% across the board (for the most part).

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4281
Re: How to linearize a 4800 printer
« Reply #2 on: June 12, 2013, 08:50:02 PM »
I'm gonna take you up on this too Pierre if you don't mind.

FilmMaker is incredible.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: How to linearize a 4800 printer
« Reply #3 on: June 12, 2013, 09:58:17 PM »

start here:
http://www.theshirtboard.com/index.php/topic,8018.0.html

and PM for the address to send the films or go to bmpromotional.com and pull the address from the web site.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1]   Go Up
« previous next »