« previous next »
Pages: [1]   Go Down

Author Topic: gauntlet filter/oiler  (Read 1255 times)

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3540
gauntlet filter/oiler
« on: June 04, 2013, 03:19:53 PM »
would anyone happen to know the Grainger part number for a filter/oiler combo for an older gauntlet?
Logged
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7862
Re: gauntlet filter/oiler
« Reply #1 on: June 04, 2013, 03:32:16 PM »
there isn't 1 oiler that will work, there are a bunch, just match the inlet and outlet side and go from there.  Also, make sure it handles the CFM and pressure

Alos, mcmaster carr is cheaper.
Logged

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: gauntlet filter/oiler
« Reply #2 on: June 04, 2013, 03:36:45 PM »
Check out zoro tools if buying online.  I got a 3/4" Wilkerson FR (for right out of the comp, not the FLR on the press) on there for way cheaper than locally or grainger/mmc, and I bet they got FLRs on there too. 

Our '92 has an older Norgren setup that's still chugging along and I just got some new o rings for it. 

*sorry the above might have been confusing, you want 1/2" at the press for the FLR
Logged

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: gauntlet filter/oiler
« Reply #3 on: June 04, 2013, 05:57:32 PM »
Quote from: ZooCity on June 04, 2013, 03:36:45 PM
Check out zoro tools if buying online.  I got a 3/4" Wilkerson FR (for right out of the comp, not the FLR on the press) on there for way cheaper than locally or grainger/mmc, and I bet they got FLRs on there too. 

Our '92 has an older Norgren setup that's still chugging along and I just got some new o rings for it. 

*sorry the above might have been confusing, you want 1/2" at the press for the FLR


BOOM!  Wilkerson is highly recommended in other industries as well.

And Zoro is fairly cheap.
Logged
Pages: [1]   Go Up
« previous next »