« previous next »
Pages: [1]   Go Down

Author Topic: Neo-Poly  (Read 1753 times)

Offline larryk

  • !!!
  • Sr. Member
  • ****
  • Posts: 439
Neo-Poly
« on: May 20, 2013, 04:54:46 PM »
OK all you ink Gurus out there..... What kind of ink should we be using on 70% Neoprene and 30% polyester?
Would this be a good choice for trying out that silicone ink?
Logged

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Neo-Poly
« Reply #1 on: May 20, 2013, 09:36:14 PM »
Hmmm.  No takers?  I'm interested as well.
Logged
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Neo-Poly
« Reply #2 on: May 20, 2013, 10:29:53 PM »
I have never heard of this blend. What type of articles of apparel or something else are they?
Logged
That rug really tied the room together, did it not?

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
Neo-Poly
« Reply #3 on: May 20, 2013, 10:52:28 PM »
My dogs hunting vest was neoprene with a poly shell I heat pressed it with no issues. I would think you could print it just like poly put a little additive in it to reduce the cure temp. Is it blended or a poly shell?


RT Screen Designs
www.rtscreendesigns.com
Logged
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Neo-Poly
« Reply #4 on: May 21, 2013, 07:38:54 AM »
Xenon Mu$tang White is designed for this type of substrate.
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline larryk

  • !!!
  • Sr. Member
  • ****
  • Posts: 439
Re: Neo-Poly
« Reply #5 on: May 21, 2013, 10:01:28 AM »
The item I am wanting to print is a "Tablet" holder and feels kinda like a wetsuit.
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7857
Re: Neo-Poly
« Reply #6 on: May 21, 2013, 10:02:22 AM »
usually the outside of those is 100% poly, and the inside is neoprene.  I did one with cad-cut for my daughter and it looks killer
Logged

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Neo-Poly
« Reply #7 on: May 21, 2013, 10:34:10 AM »
And they list the content as 70/30 rather than "closed cell neoprene with a 100% polyester shell" ? That's what throws me.
I've never heard of a shell being listed as a percentage of the total content.
Logged
That rug really tied the room together, did it not?
Pages: [1]   Go Up
« previous next »