Author Topic: Embroidery Gradient Blends  (Read 3075 times)

Offline artguy

  • Verified/Junior
  • **
  • Posts: 10
Embroidery Gradient Blends
« on: May 23, 2013, 01:42:44 PM »
Hey Guys,
I need some help...AH! :)

I'm trying to accomplish something that is somewhat frowned upon to my knowledge. I'm trying to create a gradient color blend with embroidery that has four colors or three. My digitizer is trying his best to help but he recommended that I just use two colors only so it will look good. I want to know if there are any methods which I could use to achieve the look that is desired. Here's a pic of the artwork as well as a pic of the sew-out first run. Please help me dudes. Much much appreciated
-Adrian


Offline tancehughes

  • !!!
  • Hero Member
  • *****
  • Posts: 555
  • Always learning new things!
Re: Embroidery Gradient Blends
« Reply #1 on: May 23, 2013, 01:47:45 PM »
Wish I could help here, but can't. Just wanted to let you know that looks really good.

What did you stitch that on? Looks like a pellon?

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5903
  • Email me at art@designsbydottone.com
Re: Embroidery Gradient Blends
« Reply #2 on: May 23, 2013, 01:50:02 PM »
Looks great already.  I jut had a gradation blend done for me and while it was good. It was not "real good" due to the limitations. So I do think that adding or keeping more thread colors in the blend are what you need. IMO.s
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7852
Re: Embroidery Gradient Blends
« Reply #3 on: May 23, 2013, 01:52:21 PM »
you need to mix the threads but pulling some into the other colors on each side.  like this:

Offline artguy

  • Verified/Junior
  • **
  • Posts: 10
Re: Embroidery Gradient Blends
« Reply #4 on: May 23, 2013, 01:54:13 PM »
Hey thanks tancehughes. It's on pellon yes. Still trying to blend the colors better though, still very distinct color changes and I wish I had a tip or two to make it better.

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Embroidery Gradient Blends
« Reply #5 on: May 23, 2013, 02:14:00 PM »
You have the most common problem with blending and that is the wrong color threads. In your case the your trying to go from one blue to another but you are actually using unrelated blues in the mix and it shows. Unless you have a massive inventory of thread options its so hard to pull off a decent blend.
"No man is an island"

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7852
Re: Embroidery Gradient Blends
« Reply #6 on: May 23, 2013, 02:19:56 PM »
I would say without a massive amount of threads you could do a decent blend, you'd need a lot of threads to do a great blend.

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Embroidery Gradient Blends
« Reply #7 on: May 23, 2013, 02:42:29 PM »
That logo should only be blended with two matching blues. A darker blue and a lighter blue. But they have to be blues in the same family, no teals turquoises etc.
"No man is an island"

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5320
Re: Embroidery Gradient Blends
« Reply #8 on: May 23, 2013, 03:51:35 PM »
No expert here , but I would use some blues a little closer in colors, and it depends on how many needles you have on your head...hey don't they have thread that's already blended, that might be a better option for ya.  Had to run to the back and get my thread chart robison-anton has some 3CC light blue 2351 looks like a great match.

Darryl
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline artguy

  • Verified/Junior
  • **
  • Posts: 10
Re: Embroidery Gradient Blends
« Reply #9 on: May 23, 2013, 04:40:05 PM »
Hey mk162. Nice pic, question; which thread went down first for the green hills? The dk green or the light green?
thanks

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: Embroidery Gradient Blends
« Reply #10 on: May 23, 2013, 04:46:48 PM »
I have seen some nice blends where they sublimated on top of an embroidered crest.....