Author Topic: Epson 4880  (Read 1673 times)

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
Epson 4880
« on: April 21, 2013, 11:37:39 AM »
I have an Epson 4880 that is constantly giving me the reload paper error. It has given me the error even after it has printed a sep. Any suggestions before I go Office Space on it?

Thanks!


Offline Get Shirts

  • Hero Member
  • *****
  • Posts: 649
Epson 4880
« Reply #1 on: April 21, 2013, 12:12:46 PM »
Roll or sheet?  Do you the right kind if media selected? 

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3208
Re: Epson 4880
« Reply #2 on: April 21, 2013, 05:54:28 PM »
if it's like my 4800, there is a sensor back there on the infeed. make sure it's clean. take some air and give it a shot...it also does this if the film isn't straight, so double check your going in straight. I line up the film to the horizontal cut line and square it up.
...keep doing what you're doing, you'll only get what you've got...

Offline easyscore

  • Full Member
  • ***
  • Posts: 105
Re: Epson 4880
« Reply #3 on: April 21, 2013, 06:13:44 PM »
Roll.

I threw in a new roll of film and it worked.

I just fed the old roll and used the compressed air trick and that worked too.

Thanks!



Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
Re: Epson 4880
« Reply #4 on: April 22, 2013, 07:01:01 AM »
you can turn the 'paper skew' off in the main console.