Author Topic: Murakami mesh  (Read 3817 times)

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Murakami mesh
« on: March 12, 2013, 10:39:51 AM »
Does anyone know of a distributor close to Oklahoma that carries Murakami Mesh I have been reading allot about the "S" mesh here on the board and want to try some for myself.
Thanks


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: Murakami mesh
« Reply #1 on: March 12, 2013, 10:43:50 AM »
That rug really tied the room together, did it not?

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Re: Murakami mesh
« Reply #2 on: March 29, 2013, 04:06:30 AM »
What`s the rate for S-Mesh in the States? We pay around $350 for a 50m roll 136 cm wide. That`s for the 150-S.

Offline Admiral

  • Hero Member
  • *****
  • Posts: 891
Re: Murakami mesh
« Reply #3 on: March 29, 2013, 05:16:58 AM »
What`s the rate for S-Mesh in the States? We pay around $350 for a 50m roll 136 cm wide. That`s for the 150-S.

pretty sure I pay double that...

width is 62" though

$14.2 per yard 150s
$23.65 per yard 225S

I don't know what the cost would be when buying a whole roll though. 

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Re: Murakami mesh
« Reply #4 on: March 29, 2013, 05:22:41 AM »
We  buy a yard for 150S 62" for $9.


Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: Murakami mesh
« Reply #5 on: March 29, 2013, 10:27:06 AM »
We  buy a yard for 150S 62" for $9.

Yeeeah, there's no reason for you to look for any other mesh then! Stay Murakami!

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2074
Re: Murakami mesh
« Reply #6 on: April 09, 2013, 10:59:10 PM »
I bought a lot of Roller Mesh, that stuff is so expensive but the tension levels are incredible. If I can get the Smartmesh even if it is only the 150-T to anything close to 35N then I will make the switch.


Offline Admiral

  • Hero Member
  • *****
  • Posts: 891
Re: Murakami mesh
« Reply #7 on: April 10, 2013, 11:45:00 AM »
I bought a lot of Roller Mesh, that stuff is so expensive but the tension levels are incredible. If I can get the Smartmesh even if it is only the 150-T to anything close to 35N then I will make the switch.

With being in Japan and your price on Murakami S mesh being so cheap I would just stick with that.

Less chance for moire, less pressure, save on ink, btw you don't need the tensions of Roller Mesh / standard T mesh.  S mesh is so much nicer than T.  I hate sometimes having to play with the print settings with T mesh, S mesh I know what it all needs to be at and it is versatile and forgiving a bit.


Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: Re: Murakami mesh
« Reply #8 on: April 10, 2013, 09:03:41 PM »
Does anyone know of a distributor close to Oklahoma that carries Murakami Mesh I have been reading allot about the "S" mesh here on the board and want to try some for myself.
Thanks

Northwest Graphic in Minneapolis here does. Ben is a good sales guy 612-750-3355.

Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com