« previous next »
Pages: [1]   Go Down

Author Topic: Javelin Help  (Read 2584 times)

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Javelin Help
« on: June 27, 2011, 05:28:55 PM »
I am rebuilding a 1991 Javelin and need photos of the following air lines to the back of following MAC Valves:

air flow in ------------  single valve  (Power On) -----------------  3valves (Indexer, Table up, locator)------------  Print on (Dump Valve)


I need to see what lines are attached to each Valve and attached to specific cylinders. I have all print valves and cylinders completed.

I appreciate your help.

David
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: Javelin Help
« Reply #1 on: June 27, 2011, 06:39:37 PM »
Hi David,

welcome aboard, hopefully somebody can help!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #2 on: June 27, 2011, 06:51:48 PM »
I'm very thankful to find a site without the Drama.
Logged

Offline Printhouse

  • Sr. Member
  • ****
  • Posts: 305
Re: Javelin Help
« Reply #3 on: June 27, 2011, 11:46:44 PM »
I sent you one pic.... I can take pics of what you need tomorrow.  I have mine wide open right now.
Logged

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #4 on: June 28, 2011, 07:30:40 AM »
After the air comes into the 1st valve (start Valve) where does that air line go?  Also, where does the line on the far right (Print and dump valve) go out to?

Thank you,
David
Logged

Offline inkman996

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3760
Re: Javelin Help
« Reply #5 on: June 28, 2011, 08:36:11 AM »
Not sure if you tried calling workhorse yet if not you really should those guys will bend over backwards to help you get it running even if it is an old machine you did not buy from them.
Logged
"No man is an island"

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #6 on: June 28, 2011, 08:44:29 AM »
I left message with them yesterday and not heard back yet.
Logged

Offline garagewear

  • Verified/Junior
  • **
  • Posts: 85
Re: Javelin Help
« Reply #7 on: July 30, 2011, 11:02:01 PM »
Did you get it going yet?
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Javelin Help
« Reply #8 on: July 31, 2011, 04:57:25 PM »
You should call Phil at Workhorse 602-437-2305. Or email pritz@2mfg.com
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Javelin Help
« Reply #9 on: July 31, 2011, 04:59:36 PM »
David If you will send me youre email address I will send you a pdf of the Javelin manual
Logged

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #10 on: July 31, 2011, 06:44:32 PM »
I just sent you my email in a PM.

Thanks.
Logged

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Javelin Help
« Reply #11 on: July 31, 2011, 08:29:24 PM »
David: I have problems with the email address i have listed. Try this one. rmonks@cox.net
Logged

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #12 on: July 31, 2011, 10:32:59 PM »
Thanks for the manual download. A tremendous help. Thanks again.
Logged

Offline Palmetto7

  • Verified/Junior
  • **
  • Posts: 20
Re: Javelin Help
« Reply #13 on: August 20, 2011, 06:06:39 PM »
Found the source of the major air leak.... It was the start dump valve that was stuck. Appreciate everyones help. Now starting to stop other minor leaks.
Logged
Pages: [1]   Go Up
« previous next »