« previous next »
Pages: [1]   Go Down

Author Topic: Slow Head  (Read 1199 times)

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Slow Head
« on: February 28, 2013, 09:12:40 PM »
So head one on my press prints real slow. Its an air driven head. ( dont have an issue with any of the other heads) I've replaced the speed control, and checked the air lines for kinks or blockage- found none .
So... is the MAC valve the next logical place to look?
Logged

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Slow Head
« Reply #1 on: February 28, 2013, 09:15:16 PM »
Stroke cylinder could be bypassing air inside and causing it. If you have good pressure to the speed control I would eyeball that.
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: Slow Head
« Reply #2 on: February 28, 2013, 09:19:10 PM »
O.k. thats my next  stop then -- love playing tech.
Logged

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Slow Head
« Reply #3 on: February 28, 2013, 09:26:05 PM »
It have had a few that have had an internal leak and you could not hear it out the valves exhaust. No control on the print stroke speed was the symptom on our M&R.
Logged
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline ol man

  • Sr. Member
  • ****
  • Posts: 295
Re: Slow Head
« Reply #4 on: February 28, 2013, 11:17:05 PM »
i may cannibalize a one of the other heads , to see if thats it--- it would be much nice to have full control the head that print my underbases...
Logged

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2434
Re: Slow Head
« Reply #5 on: February 28, 2013, 11:48:21 PM »
Well.  I can see I completely misread this thread and am sorely disappointed at the subject matter.   ;)
« Last Edit: March 01, 2013, 10:04:53 PM by screenxpress »
Logged
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1883
Re: Slow Head
« Reply #6 on: March 01, 2013, 06:47:05 AM »
Personally I prefer......oh never mind
Logged
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA
Pages: [1]   Go Up
« previous next »