Author Topic: What have you printed lately?  (Read 641269 times)

Offline SERJ

  • Full Member
  • ***
  • Posts: 230
Re: What have you printed lately?
« Reply #3270 on: November 25, 2020, 03:41:13 AM »
6 colors. Discharge CMYK


Offline rusty

  • Hero Member
  • *****
  • Posts: 504
Re: What have you printed lately?
« Reply #3271 on: November 25, 2020, 08:11:56 AM »
wow.

amazing job as usual.

What inks are you using for CMYK?

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: What have you printed lately?
« Reply #3272 on: November 25, 2020, 09:37:05 AM »
That looks great Serj!


6 colors. (on a manual at that). Very nice.  I do a lot of 5 colors (due to the restriction of our smaller press) I’m at 5 colors with multiple colors in the art also. So I’d like to nab up a good ink set. We don’t have our larger dryer hooked up in this building so I can’t really do discharge at this time.  I’ve been using all plastisol. I get pretty good “variety”out of the colors and ink type we use here currently, but there could be more POP or richness in color by using another ink type that is more clean or pure. Those colors your use seem to be what I’m looking for but can’t use them just yet.
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline SERJ

  • Full Member
  • ***
  • Posts: 230
Re: What have you printed lately?
« Reply #3273 on: November 25, 2020, 09:52:00 AM »
Screen Mesh: 77T (196)
Resolution: 55 lpi
Products:

MagnaPrint® Discharge White AB AW (under-base)

MagnaPrint®
Discharge AB AW (CMYK)

MagnaPrint® HB Opaque (Highlight White)

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: What have you printed lately?
« Reply #3274 on: November 25, 2020, 10:55:17 AM »
That is some nice detail Serj, I'm with Dan those inks you use are great and nice pop, but I got a feeling I would make a mess trying to use them.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline SERJ

  • Full Member
  • ***
  • Posts: 230
Re: What have you printed lately?
« Reply #3275 on: December 09, 2020, 02:21:00 AM »
Plastisol

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: What have you printed lately?
« Reply #3276 on: December 16, 2020, 06:48:47 PM »
Been a while since I posted here. This one from today is worthy....

7 colors, all 305 mesh on a natural color garment.

Dale Hoyal

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: What have you printed lately?
« Reply #3277 on: December 17, 2020, 02:12:58 PM »
Look!  It’s our ole friend.  That’s an awesome print. I saw that on Facebook. Really great stuff!
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Atownsend

  • !!!
  • Sr. Member
  • ****
  • Posts: 421
Re: What have you printed lately?
« Reply #3278 on: October 27, 2022, 08:49:31 AM »
Haven't seen any prints here lately, so heres one.

Had a tough time separating this via sim process, so I opened for an index separation. I still cant really understand why it was so hard for me to sep via Sim P. The original file was CMYK, which may have played a part in it. I just couldnt get the colors right with sim. Still a bit of a PIA, but it really came together well after we had a bit of back and forth with the colors. Damn close to the original! 1 more color would have done it haha, ended up being 10. Could have probably worked up the browns bit better, but got tired of messing with it EOD yesterday.


Offline Doug S

  • Gonzo Member
  • ******
  • Posts: 1482
Re: What have you printed lately?
« Reply #3279 on: October 27, 2022, 04:51:40 PM »
I don't see a thing wrong with that.  Looks fantastic. 
It's not a job if you love doing it.

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: What have you printed lately?
« Reply #3280 on: October 28, 2022, 02:33:33 PM »
Seems to look like a good print. Jobs done, Looks good!  Move onto the next.
« Last Edit: October 31, 2022, 12:31:18 PM by Dottonedan »
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: What have you printed lately?
« Reply #3281 on: October 31, 2022, 12:43:31 PM »
So it should be fun to keep this alive again Since Atownsend was so kind as to bring it back into play.

We who have been around for a while have seen this and some have even done this. But it’s still so cool to do and see.

ICC Liquid Silver, printed through 110 mesh coated 2:4
USING A VERY SLOOOOOW STROKE.
Double stroke, Flash, ROLL, Single stroke.

Then cured via the dryer... Then crumpling a sheet of aluminum foil. and laying that over top of the print...and heat setting that with heavy pressure...at 320 for 10 seconds.
At this point, my intent was to achieve a glossy metal look, but the mesh tracks (even from the flattening screen) were leaving mesh tracks in it.
That flattening screen is on a old 110. We are going to bump that up to a 305 to achieve a smoother result there but I think the mesh coating needs to be thicker also.

Printed on Black tees mostly, but there was this grey speckle tee also.


I only wish I was able to get a smoother top surface to aid in the melted liquid silver look. Like a gloss silver.
My thought are that I would need an even thicker stencil.  No?


« Last Edit: October 31, 2022, 12:48:27 PM by Dottonedan »
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5330
Re: What have you printed lately?
« Reply #3282 on: October 31, 2022, 02:22:46 PM »
Not a bad look Dan, I once printed some silver through a 80 mesh and then printed some clear gel ink on top, to me it really looked great, something like liquid metal, but the drawback it was kind of thick on the shirt.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: What have you printed lately?
« Reply #3283 on: November 02, 2022, 09:02:10 AM »
I like the mesh pattern from the flattening screen.
Dale Hoyal

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: What have you printed lately?
« Reply #3284 on: July 13, 2023, 10:36:50 AM »
Band season has begun...

Dale Hoyal