What have you printed lately?

[tonypep]

Thank you. A little background to the project; which in turn took on a life of its own and launched a new line. This was reverse engineered from production backwards which; while a little out of the norm, was necessary. Often, when some attempt to do allover or over the seam printing the concept comes from Art or worse, Sales. Usually a mock up is created that can not be produced effectively or sometimes not at all. I proposed what was possible but immediately initiated strict guidelines in order to ensure we could create something relatively different while at the same time maximizing efficiencies and therefore creating good margin. A whole lot of R&D and creativity went into every aspect of production and it continues to improve as orders come in and the lightbulbs occasionally  pop up.
Obviously I can't go into specifics but we are very pleased how it has evolved.

[DannyGruninger]

New project we are working on in the shop...... We just sampled this yesterday as we have 15 designs to produce all similar to this one..... In person this print looks killer, probably better then most that comes out of this shop with the complexity of the really light ghost areas of the design. This is an 8 color print with discharge base..... 225s base double stroke, 272/305 top colors single stroke

skin tones and everything are spot on though in person which I've struggled with in the past so pretty pumped about these

[244]

Does the magic you mentioned involve copious amounts of vodka?

Vodka is not relevant, only Jack Daniel's

Try Jack Single Barrel. If they don't carry it there let me know and I will load up Andrew at the show. Nice prints? Very nice!

[tonypep]

Since you chimed in, Thanks Rich for helping our project move forward.
tp

[dirkdiggler]

nice!

[SERJ]

Does the magic you mentioned involve copious amounts of vodka?

Vodka is not relevant, only Jack Daniel's

Try Jack Single Barrel. If they don't carry it there let me know and I will load up Andrew at the show. Nice prints? Very nice!

I do not know Jack Single Barrel

[1964GN]

Nothing earth shaking here... just a 2 color vette. If you saw the photo I had to work with you would be MUCH more impressed with the print LOL

[1964GN]

A sim 7 color we are printing now. While I am not the best separator, I am getting better.

[tonypep]

This.......BTW found a purple that discharges. Will send peg Monday gotta run

[244]

Does the magic you mentioned involve copious amounts of vodka?

Vodka is not relevant, only Jack Daniel's

Try Jack Single Barrel. If they don't carry it there let me know and I will load up Andrew at the show. Nice prints? Very nice!

I do not know Jack Single Barrel

You will. Tell Andrew to bring an extra bag.

[SERJ]

Printing on nylon
Color №1 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® Underbase Grey SL
Color №2 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® AquaPlussFF
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Yellow
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Cyan
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Magenta
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Black

[ericheartsu]

that is amazing.

[ScreenPrinter123]

Printing on nylon
Color №1 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® Underbase Grey SL
Color №2 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® AquaPlussFF
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Yellow
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Cyan
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Magenta
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Black

That's it. I quit.

[Rockers]

Have to try the 90lpi set up soon and see where it leads me, hopefully somewhere good:)

[3Deep]

Printing on nylon
Color №1 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® Underbase Grey SL
Color №2 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 90, Y
MagnaPrint® AquaPlussFF
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Yellow
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Cyan
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Magenta
Color №3 Elliptical dot, 90 lpi, angle 82.5 degrees, mesh count 120.34, Y
MagnaPrint® HB Black

That's it. I quit.
Are these numbers standard numbers or in German metric or something, I get the 90lpi angle 82.5 I think but mesh ct 90.. 120.34 y whats that in USA standard