What have you printed lately?

[screenxpress]

Dan or Squeegee:

LPI on 230 for base??

[Squeegie]

I run virtually all my stuff 55 lpi @ 22.5 degrees, elliptical dot.

Dan does my simulated seps and this was his recommendation many, many moons ago. Seems to work well for us, so no reason to change.

[Doug S]

Squeegie, that's the stuff right there.  Pretty sharp.  How many colors?  We run most of ours 55 lpi also with the occasional 65lpi for small prints with a lot of detail.

[screenxpress]

Thanks guys.  That was what I was looking for for 230 mesh.

[Squeegie]

Thanks Doug S.
This was done with my press max of 6 colors (gotta revolve this one)
55 LPI @ 22.5 elliptical all colors.

230 - White
Flash
305 - Yellow 102
305 - Green 361
305 - Red 032
305 - PMS Proc Blue
305 - Black

The left chest was done @ 60 LPI.
230 - White
Flash
230 - Black

[LoneWolf2]

Love the art! Who did it?

[Prince Art]

Really cool stuff - love the rich colors on the back. Nicely done.

[Dottonedan]

My man Bill is a very good printer.
he's one that can take a full color print and really dial everything in on a 6 color press.

Most everything I do for him is 4 colors + base and top white or 5 colors and a base white.
With that, he seems to be able to do any job that comes his way and do it in excellence.
Up north, he's a diamond in the rough woods.

I could say it's all in the seps, but it's only part of it.  I've tried to convince him to do some print consulting g but he's a little too modest or something.

Anyone who's got a similar press, and needs assistance taking it to the next level, he can show you how to do wonders with it. I'm sure.

[3Deep]

Give yourself more credit Dan you've done seps for me in the pass which maxed out my press and I did just what you said to do and the print was spot on.  Just MHO but your one that can turn a 8 color print into a six color and not miss any colors, you really know how to blend colors in your seps so THANKS!!!

[Squeegie]

Love the art! Who did it?

Local artist friend.  Calls himself the Cosmic Moose.
He has some unique stuff for sure...

https://www.facebook.com/charliekartist/

Thank you for the props Dan...but I too agree with 3Deep...

Give yourself more credit Dan...you really know how to blend colors in your seps

Really cool stuff - love the rich colors on the back. Nicely done.

Thank you!

[LoneWolf2]

Artistically speaking, this print isn't that fancy, but this is definitely the nicest print i've ever gotten on sweatshirts which are always a challenge (champions reverse weaves).
Underbase, red, blue, top white.

[SERJ]

Water based , 3 colors, 120 mesh, 90 Lpi. Magnaprint HB Opaque

[3Deep]

That's some really good detail there Serj, I'll like to try those magna inks one day

[PixelPimp]

nice print and sep Serj! wow 90 lpi on a 120mesh? that's impressive!

[rusty]

nice print and sep Serj! wow 90 lpi on a 120mesh? that's impressive!

I am pretty sure he is using the european  mesh numbers so a euro 120 would be equivalent to a 305. Unless he's a wizard, and after seeing some of his prints he may well be.