Author Topic: What have you printed lately?  (Read 640319 times)

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: What have you printed lately?
« Reply #1755 on: November 24, 2014, 12:33:55 PM »
Hoping to see some tones like that shooting out of our new ST next week after install.

No reason why you shouldn't... Our ste really is the heart of my shop right now, without it I would go flip burgers LOL...... This job here was setup on press and zero micro adjustment was needed.... Not one move on any micro LOL


Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse


Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: What have you printed lately?
« Reply #1756 on: November 24, 2014, 12:37:44 PM »
That's what I'm looking for  :)
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: What have you printed lately?
« Reply #1757 on: November 25, 2014, 03:02:31 PM »
Can't remember if I posted this design before but this is a reprint this time.... Went back and made a few adjustments to the seps to match the original artwork a bit better..... 60 lpi on this one, discharge base 225/40 and top colors on 272 N mesh...1 time around the press, 3 of the screens have a double stroke with single stroke everywhere else. Printing at 48 doz/hr right now which is pretty slow but my dryer cannot handle more with the dbase. 8 screens total on this including underbase.
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What have you printed lately?
« Reply #1758 on: November 25, 2014, 03:14:40 PM »
Don't worry Danny...........you'll get better with practice ;)

Online 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5325
Re: What have you printed lately?
« Reply #1759 on: November 25, 2014, 03:38:49 PM »
they should rename this section to Danny's Creation's, nice work guy as always
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What have you printed lately?
« Reply #1760 on: November 25, 2014, 03:39:46 PM »
Time to sample New England for next year

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: What have you printed lately?
« Reply #1761 on: November 25, 2014, 03:42:14 PM »
Time to sample New England for next year

Tony how wide is that print...You print it sideways on the boards right

I would ask if its discharge but that's a dumb question to ask you...

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What have you printed lately?
« Reply #1762 on: November 26, 2014, 06:15:13 AM »
30", no, and yes. In order to achieve smooth over the seam work and incorporate halftones with one screen with consistency (boat is blurry in pic for some reason), simply laying a shirt on an oversize board does not cut it for us. While these are practically cookie cutter production now; much pre-thought, planning, and a few mistakes were necessary to get the process to where it is now. Still refining.

Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2877
Re: What have you printed lately?
« Reply #1763 on: November 26, 2014, 08:33:14 AM »



You print it sideways on the boards right


We did a similar style/placement print and that's how we did it. Lay the shirt so the bottom overhangs in the direction you are indexing, so air doesn't blow in through the collar and mess with positioning during indexing.
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What have you printed lately?
« Reply #1764 on: November 26, 2014, 09:12:17 AM »
With spritz

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: What have you printed lately?
« Reply #1765 on: November 26, 2014, 09:13:45 AM »
Chuggin' along learning this i-Image ST.
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Prosperi-Tees

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4297
  • Common Sense - Get Some
Re: What have you printed lately?
« Reply #1766 on: November 26, 2014, 12:52:31 PM »
I love Kindigit's style of cars

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: What have you printed lately?
« Reply #1767 on: December 04, 2014, 07:22:16 PM »
We are re-visiting 4CP on DC under base...sorry, crappy phone picture.
Dale Hoyal

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: What have you printed lately?
« Reply #1768 on: December 04, 2014, 07:37:25 PM »
A couple we just did..... The horse is a 5 color print with underbase, and the other print is a 7 color including base. 60 lpi on everything, just 1 time around the press. Double stroke the bases on these, and 1 color was a double stroke on both with everything else being singles. We didn't have time to really dial these in or make changes as I would have liked to improve them quite a bit we just did not have time this go around. When I go to print re orders we will make changes and make them look better so I'll post again when we re print




Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline alan802

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3535
  • I like to screen print
Re: What have you printed lately?
« Reply #1769 on: December 05, 2014, 10:22:54 AM »
Nice stuff as usual.  I've got a few pics but the jobs are so boring and mostly simple but I'll post them later anyway.  Nothing but multi-colored spot jobs on darks.  Right now we've got more screen printing jobs in the system than we did all last December, and last year was our best year by a huge margin that we're having a hard time beating last years numbers year to date.  We're only up by single % over last year, I guess I didn't realize how good it was last year until I compare this year to it.  That's the good and bad about having a record year by a huge margin, the next year can be slightly better but it feels like it was somewhat of a failure. 
I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it -T.J.
Those who expect to reap the blessings of freedom, must, like men, undergo the fatigues of supporting it -T.P.