Author Topic: What ever happened to that LED Exposure Baby Joe 2000?  (Read 1555 times)

Offline inkstain

  • Full Member
  • ***
  • Posts: 152
What ever happened to that LED Exposure Baby Joe 2000?
« on: February 11, 2013, 08:13:40 PM »
Hi guys,
I remember a little while ago there was a discussion on the LED Exposure unit baby joe 2000?
Did any of the big boys from here try it out?
Was it, Is it, any good?
Looking for some info on it if possible.

Its coming close to purchase a used/new exposure unit for me.  I want to say bye bye to my flourescents.  Obviously, the nuarc msp3140 is something I've been drooling over for a while.
Cheers!


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6367
Re: What ever happened to that LED Exposure Baby Joe 2000?
« Reply #1 on: February 11, 2013, 08:25:08 PM »
Lou and I are working on a test here at our facility. so far the plan is to test three or four different mesh counts and SBQ and dual cure emulsions.
We'll check the stencil quality under the microscope and compare print results on the actual garments (measured with a densitometer).
Part of the test will involve the exposure time comparison and long term ease of maintenance and potential replacement part costs.   

'probably in the next 10-15 days . . . You are more than welcome to come and join us if Cleveland is not too far!

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6367
Re: What ever happened to that LED Exposure Baby Joe 2000?
« Reply #2 on: February 11, 2013, 08:27:00 PM »
You are more than welcome to come and join us if Cleveland is not too far!


DUH, looks like Hawaii . .  Not sure I would be coming to Ohio weather from there! :)
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline inkstain

  • Full Member
  • ***
  • Posts: 152
Re: What ever happened to that LED Exposure Baby Joe 2000?
« Reply #3 on: February 11, 2013, 08:30:23 PM »
You are more than welcome to come and join us if Cleveland is not too far!


DUH, looks like Hawaii . .  Not sure I would be coming to Ohio weather from there! :)

Haha, thanks Pierre for the invite!  I'm very interested in your testings with this product.
Please keep me/us posted!
All the best!

Offline LDTRONIX

  • Verified/Junior
  • **
  • Posts: 26
Re: What ever happened to that LED Exposure Baby Joe 2000?
« Reply #4 on: February 23, 2013, 02:11:43 PM »
search for
"LED Exposure unit first impressions"

or see here:
http://www.theshirtboard.com/index.php/topic,7229.0.html
« Last Edit: February 23, 2013, 02:33:44 PM by blue moon »
They called the inventor of AC electricity (TESLA) names, even fried dogs in the street to prove AC was bad.