Author Topic: How to print this....???  (Read 4958 times)

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
How to print this....???
« on: February 04, 2013, 03:31:37 PM »
Ok not sure if this is in the right forum so admins please move if necessary.

So I got an email this morning from one of the sales people asking "how many colors is this and how can we reduce the colors to make it cheaper in price?" Well first off we only do spot printing and typically only do 2-3 color jobs and sometimes 4 color but never any process printing, so usually when I see something like this I tell the sales people that we can't do it.....

But I'm curious if there is a way to print this in a 2-3 color using spot printing.....????



Nick


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: How to print this....???
« Reply #1 on: February 04, 2013, 03:33:41 PM »
That would be a minimum of 8 colors for us

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: How to print this....???
« Reply #2 on: February 04, 2013, 03:34:13 PM »
4cp might be the way to go depending on the color of the garment and the number of print stations you have.

How's about some more details?

Also, how many shirts?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6055
Re: How to print this....???
« Reply #3 on: February 04, 2013, 03:56:30 PM »
since we have a 10 color press, 8 would be it for us. I'd go sim or process with some extra color plates.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: How to print this....???
« Reply #4 on: February 04, 2013, 03:57:32 PM »
more detail would be nice, I have to decide if I want to steal this one from you. ;)  just kidding

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
Re: How to print this....???
« Reply #5 on: February 04, 2013, 04:10:41 PM »
I don't know the details of the job, this is all they gave me. I don't even know shirt color. But when we have done this job in the past (different art) I think we usually do 100....I think.

Like I said above we don't do 4color or process printing, don't have the inks or the knowledge to do it....

Those that said 8-10, how would you separate that out? So for such a lame question, I still only work primary in Illustrator so something like this for me in next to impossible to figure out.....

is there no way to get this down to 2-3 color??


Nick

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7858
Re: How to print this....???
« Reply #6 on: February 04, 2013, 04:11:57 PM »
not and have it look good.

send it out to a separation service like dot-tone-dan...it will come back and you can print it...usually with little or no tweaks.

Offline Gabe

  • Sr. Member
  • ****
  • Posts: 483
  • If it`s not alive, I can print it.
Re: How to print this....???
« Reply #7 on: February 04, 2013, 04:35:23 PM »
totally agreed, it looks like it needs the keen eye of an expert separator
good luck team mate

Offline Rocfrog

  • Sr. Member
  • ****
  • Posts: 273
Re: How to print this....???
« Reply #8 on: February 04, 2013, 04:43:39 PM »
Just ran it thru Separation Studio to see what it would do and it's showing 9 colors but there's not much in the purple or green so I could drop it down to 7, but that's still crazy!!!

Nick

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: How to print this....???
« Reply #9 on: February 04, 2013, 06:37:37 PM »
Not too crazy. There is a lot going on in that image.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: How to print this....???
« Reply #10 on: February 04, 2013, 06:46:29 PM »
for 100 shirts it's crying out to be done DTG.
Wishin' I was Fishin'

Offline sweetts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1768
  • Simplicity is the ultimate sophistication DUH
How to print this....???
« Reply #11 on: February 04, 2013, 07:16:22 PM »
You can buy sublimation sheets printed out then just heat press on shirt, have to be poly but it's a cheap way to go


RT Screen Designs
www.rtscreendesigns.com
RT Screen Designs
Willowick Ohio
www.rtscreendesigns.com

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: How to print this....???
« Reply #12 on: February 04, 2013, 07:26:14 PM »
Ok not sure if this is in the right forum so admins please move if necessary.

So I got an email this morning from one of the sales people asking "how many colors is this and how can we reduce the colors to make it cheaper in price?" Well first off we only do spot printing and typically only do 2-3 color jobs and sometimes 4 color but never any process printing, so usually when I see something like this I tell the sales people that we can't do it.....

But I'm curious if there is a way to print this in a 2-3 color using spot printing.....????



Nick


for a small qty, 4 color process would give you a pretty good image (on white shirt only). It could be further improved with a couple of spot colors, but then you are getting into sim process category that would look much better.

We would print this for less than $4 per shirt and make it look pretty good. And before anybody starts screaming bloody murder, that includes $$$ for the seps and still almost $300 per hour for the press time (it would take us about an hour start to finish. If in a hurry we could do it in less than 30 min).

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1220
Re: How to print this....???
« Reply #13 on: February 04, 2013, 07:45:13 PM »
Nick, if you want to keep it somewhat local here in Colorado we can print the job for you. If your interested shoot me an email and I will send you pricing for us to print it. I'm sure we can price it out so you guys make some money and retain the client.

Danny
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: How to print this....???
« Reply #14 on: February 05, 2013, 12:39:41 AM »
Freedom Fashion Formula transfers from www.fmexpressions.com