Author Topic: Hardener on Chromablue?  (Read 4068 times)

Offline ScreenPrinter123

  • Hero Member
  • *****
  • Posts: 863
Hardener on Chromablue?
« on: January 31, 2013, 07:46:37 AM »
So in trying to do the slow switch over to doing as much discharge as possible to minimize on-press time/get soft hand, is the difference in exposure times.  Since we'll either being doing all discharge on prints or a base discharge then plastisol on top, even the plastisol colors will be being touched by the wet discharge base on the print side, and therefore I presume those plastisol screens will have to go on a water resistant emulsion in addition to the discharge base.  This will add quite a bit of time to our overall exposure time.

So, my question is, has anyone tried using hardener with an emulsion like chromablue (which is what we use with plastisol)?  I figure this has to be considered in two ways: (1)  Since the hardener was not made to go on chromablue, will it "adhere" to the chromablue as it would any other emulsion, or would it not?  And/or would the hardener itself do anything "weird" to the chromablue making the emulsion unusable for the job?  Anyone ever tried this?  (2) How does the hardener operate? Does it act like a protective shell or in another way?  If like a shell, and the hardener "adheres" to the chromablue as it would any other dual cure/wb emulsion without any negative effects to the emulsion, then why not just use something like a chroma blue with a hardener to cut down on overall exposure time and still have the water resistant emulsion effect?  Any pros can provide some insight?

Thanks!
« Last Edit: January 31, 2013, 07:50:24 AM by ScreenPrinter123 »


Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Hardener on Chromablue?
« Reply #1 on: January 31, 2013, 09:08:32 AM »
Gary Fox told me it should work.  It won't last incredibly long like a true emulsion for WB will... but you can do smaller runs this way.

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Hardener on Chromablue?
« Reply #2 on: January 31, 2013, 09:25:21 AM »
tried it, it won't hold up on a auto for more than 50 prints, it's a softer emulsion by nature, we even tried the Chromaline CP Tex supposedly made for discharge, it's pretty aweful too. So far for us Ulano 925 wr, if prepped right works good, Xenon Nova with Diazo is like steel, no hardener needed, or post exposing with the Nova, and we are now using Murikami Aquasol HVP with Diazo and it's got a really nice price point per gal, coats really really nice, holds up awesome on press for discharge or plasitsol printing, and exposes really fast for a Diazo emulsion. Chromoma blue was our favorite for plastisol, but we have been testing to get use into 1 emulsion shop wide, we are pretty sure the Murikami is the winner!
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline IntegrityShirts

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1179
Re: Hardener on Chromablue?
« Reply #3 on: January 31, 2013, 09:37:42 AM »
tried it, it won't hold up on a auto for more than 50 prints, it's a softer emulsion by nature, we even tried the Chromaline CP Tex supposedly made for discharge, it's pretty aweful too. So far for us Ulano 925 wr, if prepped right works good, Xenon Nova with Diazo is like steel, no hardener needed, or post exposing with the Nova, and we are now using Murikami Aquasol HVP with Diazo and it's got a really nice price point per gal, coats really really nice, holds up awesome on press for discharge or plasitsol printing, and exposes really fast for a Diazo emulsion. Chromoma blue was our favorite for plastisol, but we have been testing to get use into 1 emulsion shop wide, we are pretty sure the Murikami is the winner!

I've gone through a few gallons of the HVP and on this last one I put in the diazo to see how it affected the process.  I'm sort of torn between hardener and no diazo and just putting in the diazo and dealing with longer exposure times.

Comparing time I'd lean toward the straight HVP with hardener being a little faster than HVP with diazo.  I've found them bot pretty comparable in durability though.

I still like the HV blue and I feel like it held better detail straight out of the bucket compared to the pink, but that could just be in my head!

Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Hardener on Chromablue?
« Reply #4 on: January 31, 2013, 10:18:19 AM »
I hear ya Integrity, my friend Patrick Lashbrook that did all the production at Real Thread, all waterbased and discharge turned me on to the HVP. They do multi color discharge jobs, AOP discharge, huge runs using the HVP so for me they did the testing to see how it would hold up with w/b printing on their challenger 3. Actually the HVP without diazo will hold up for small wb orders like 25-50 pieces, maybe longer on a manual press, but on the auto they need to be hard, adding the diazo with only putting water in the diazo bottle 1/4 of the way up keeps the thickness of the emulsion and I can say it's rock hard and long lasting on press. Now that we have the I-Image CTS in action the exposure times are cut way down so it's very tolerable time wise in that aspect, but running the gambit of emulsions for discharge printing, my top two would be the HVP with diazo and the Xenon Nova with diazo. Thing with the HVP you can get it for about 50 bucks a gallon vs 88 for nova.
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5675
Re: Hardener on Chromablue?
« Reply #5 on: January 31, 2013, 10:59:23 AM »
It can work but the best bet is to use products designed for this specific application. For instance CCI 25WR with hardenerX. Otherwise you're rolling the dice.

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Hardener on Chromablue?
« Reply #6 on: January 31, 2013, 11:35:47 AM »
I hear ya Integrity, my friend Patrick Lashbrook that did all the production at Real Thread, all waterbased and discharge turned me on to the HVP. They do multi color discharge jobs, AOP discharge, huge runs using the HVP so for me they did the testing to see how it would hold up with w/b printing on their challenger 3. Actually the HVP without diazo will hold up for small wb orders like 25-50 pieces, maybe longer on a manual press, but on the auto they need to be hard, adding the diazo with only putting water in the diazo bottle 1/4 of the way up keeps the thickness of the emulsion and I can say it's rock hard and long lasting on press. Now that we have the I-Image CTS in action the exposure times are cut way down so it's very tolerable time wise in that aspect, but running the gambit of emulsions for discharge printing, my top two would be the HVP with diazo and the Xenon Nova with diazo. Thing with the HVP you can get it for about 50 bucks a gallon vs 88 for nova.

I have been running HVP consistently on 100-200 pc discharge runs with just hardener no diazzo without breakdown. I have ran as hi as 300 with out it and its been fine. Its all in that first exposure that seals the deal. If you do not nail that then you will have a problem. We also do not post expose. Just 1 and done.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Hardener on Chromablue?
« Reply #7 on: January 31, 2013, 12:14:01 PM »
what do you block out with if not post exposing?

Hvp is the only emulsion in my shop.  Have diazo on hand but have never needed it.   Everything J said above is correct in my experience- thorough exposure + hardener as needed.


Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: Hardener on Chromablue?
« Reply #8 on: January 31, 2013, 12:26:15 PM »
750 pieces yesterday on Aquasol HV and hardener no diazo super fine detail no emulsion breakdown.
(on screens with really fine lines etc, that is typically the first area to degrade)


Offline Inkworks

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1761
  • Pad&Screenprinter
Re: Hardener on Chromablue?
« Reply #9 on: January 31, 2013, 12:33:50 PM »
A timely thread! So are you guys going with no diazo just to shorten up exp. times?
Wishin' I was Fishin'

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: Hardener on Chromablue?
« Reply #10 on: January 31, 2013, 12:40:36 PM »
Haven't needed it yet, and yes, after using photopolymer most of my career the exposure times for
anything with diazo are almost unbearable.

I am considering a switch though as I'd like to begin washing screens out in an area with a skylight.

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3200
Re: Hardener on Chromablue?
« Reply #11 on: January 31, 2013, 12:59:13 PM »
we are using HVP without diazo on small discharge runs but we have also been trying CCI TX-Discharge, same price point as HVP but is sold locally. Adding the diazo is murder on expo time so we are trying to find a way around it when we can. This hardener you guys are using, what does it do to your reclaiming process? maybe adding time for exposure with diazo will save time on reclaiming with hardener? I have never used a hardener, maybe something else to try out after we are sick of the diazo. We went to a single point MH unit recently so dialing in our time is the issue at the moment.
...keep doing what you're doing, you'll only get what you've got...

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4277
Re: Hardener on Chromablue?
« Reply #12 on: January 31, 2013, 01:01:07 PM »
Hardener adds a few minutes in the dip tank is all. I'm fine with that, we don't ever wait on the dip tank.

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4914
Re: Hardener on Chromablue?
« Reply #13 on: January 31, 2013, 01:12:44 PM »
Yes, love dual cures but expo times keep them out of my shop.

I actually prefer reclaiming with hardener!  You can leave the screens in the tank for as long as you like without the emulsion sloughing off.

Sent from my XT907 using Tapatalk 2


Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Hardener on Chromablue?
« Reply #14 on: January 31, 2013, 03:15:24 PM »
what do you block out with if not post exposing?

Hvp is the only emulsion in my shop.  Have diazo on hand but have never needed it.   Everything J said above is correct in my experience- thorough exposure + hardener as needed.

Just tape over them. Stop the squeegees from getting that high and they dont ever have an issue. Run all tape on the top.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin