Author Topic: "Stir with non-metallic paddle" Why?  (Read 2326 times)

Offline cvreeland

  • Full Member
  • ***
  • Posts: 111
"Stir with non-metallic paddle" Why?
« on: January 16, 2013, 05:31:55 PM »
This is a thing that's never been explained to me. All diazo emulsions will ship with the little bottle of sensitizer & the instructions for 20 years have said to use a non-metallic paddle or stir stick to stir the sensitizer in to the photo emulsion.

But... as soon as the bubbles settle, we're all pouring it into a metallic scoop coater. I've used a stainless steel spatula to stir my emulsion for years, and if there's been a problem, then I do't know what it is.

Why do emulsion manufacturers still put that in the instructions? What bad thing is supposed to happen if we use a metallic stirrer?

Just one of those little questions in life...
Owner, writer Art Wear - a screen printing blog


Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: "Stir with non-metallic paddle" Why?
« Reply #1 on: January 18, 2013, 10:33:36 AM »
Diazo is an acid base.

combined with water and metal, it can oxidize. It does tarnish those steel blades over time.



Blacktop Graphics Screenprinting and Consulting Services

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5681
Re: "Stir with non-metallic paddle" Why?
« Reply #2 on: January 18, 2013, 10:38:45 AM »
Correct. It's why most come with a wooden paint stirrer

Offline cvreeland

  • Full Member
  • ***
  • Posts: 111
Re: "Stir with non-metallic paddle" Why?
« Reply #3 on: January 18, 2013, 07:47:15 PM »
It does tarnish those steel blades over time.

The horror!  :P

Discharge is a lot worse on my spatulas than emulsion.
Owner, writer Art Wear - a screen printing blog