« previous next »
Pages: [1]   Go Down

Author Topic: What Glue  (Read 2297 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
What Glue
« on: January 10, 2013, 10:40:22 AM »
What glue works best for glueing mesh to frames? I know there are a lot out there but need some input
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What Glue
« Reply #1 on: January 10, 2013, 10:57:20 AM »
There are basically two types. A two part cyanoacrylate (Think of Locktite) which is fast, and single part lacquer base which is slow curing but more permanent. Be sure to ventilate!
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6366
Re: What Glue
« Reply #2 on: January 10, 2013, 11:55:11 AM »
Quote from: tonypep on January 10, 2013, 10:57:20 AM
There are basically two types. A two part cyanoacrylate (Think of Locktite) which is fast, and single part lacquer base which is slow curing but more permanent. Be sure to ventilate!

>cyanoacrylate

that's superglue, right?

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Zelko-4-EVA

  • Hero Member
  • *****
  • Posts: 573
Re: What Glue
« Reply #3 on: January 10, 2013, 12:07:10 PM »
Quote from: blue moon on January 10, 2013, 11:55:11 AM
Quote from: tonypep on January 10, 2013, 10:57:20 AM
There are basically two types. A two part cyanoacrylate (Think of Locktite) which is fast, and single part lacquer base which is slow curing but more permanent. Be sure to ventilate!


>cyanoacrylate

that's superglue, right?

pierre


back when we used statics we used a product called "Frame Fast" - http://www.framefast.com/

i think its the two part cyanoacrylate that Tony mentioned.

superglue is a type of cyanoacrylate, but the frame fast used an aerosol activator.  once you sprayed the activator over the glue, it would be cured.
Logged

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: What Glue
« Reply #4 on: January 10, 2013, 12:07:43 PM »
Thats right my friend
Logged

Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: What Glue
« Reply #5 on: January 10, 2013, 01:21:17 PM »
You are correct.  However there are two thicknesses that are dependent on mesh count.  1 for all mesh counts up to 160.  1 For all others
Logged
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: What Glue
« Reply #6 on: January 10, 2013, 01:58:43 PM »
I was going to answer "fresh glue".     (Can you tell I use CA?   ;D)

Frame Fast trade grade is in the 100-300CPS range, good stuff for meshes between 125 and 305 mesh--haven't had problems with it on those counts.
I try not to buy more than I'll use in a year or two, it definitely has a shelf life.


I've heard good things about the two part polyurethane (IIRC, Rhino-mite was the name I saw) but haven't tried it--anyone have experience with that type of glue?
Logged
Pages: [1]   Go Up
« previous next »