The Auto Laser Lettering (ALL) program is optional software that is designed to be used with Proel laser cutters to provide embroiderers with one of the fastest, most profitable techniques for creating appliqué embroidered lettering and numbering.
ALL automates the process of designing number and letter appliqué designs that are then sent to the laser for cutting and embroidering. It works in conjunction with FocusCut III, which is the laser-cutting program that comes with the Proel LaserBridge, E-Laser, and Spartacus machines. It also is compatible with Proel Millennium digitizing software, which runs the automatic embroidering of cut designs. With ALL it is profitable to create even a single piece because of the time and labor savings from using this program.
It works with True Type fonts to create the most popular typeface styles. It also offers a variety of finishing stitches such as zigzag, column, bean (triple), and a single running stitch. Characters may be created for single or multiple layers of fabrics thus providing for kiss cut and multicolored appliqués.
ALL offers full control of cutting and stitching line placements thus enabling the user to create a variety of appliqués, including but not limited to reverse, multi-layer, and fashion trim appliqués where a running stitch is sewn in the middle of the fabric and then cut on both sides of the stitch to create a fat-looking column. Favorite styles may be created and the font, stitch type, size, and border can be saved for quick recall.
ALL also can be used for shapes and images other than letters and numbers, thus making it an automatic appliqué digitizing system as well. The same capabilities that are used for letters and numbers may be applied to any True Type image, thus making ALL a program that automates and combines stitching and cutting simultaneously.
The greatest feature of ALL is its ability to generate embroidery data, cutting data, and the necessary automatic offset when using a LaserBridge or E-Laser machines.
The automatic offset feature tells the laser where to go after the embroidery process is completed. It offers full control to allow for precise positioning of the laser as well as the correct depth that the laser should cut.
Bito carries a full line of laser cutting equipment and embroidery digitizing software. For more information, contact BITO at 866-BITO-USA (866-248-687); e-mail:
bito@bitousa.com or visit the Web site at
www.bitousa.com.
