Author Topic: Printwear Magazine  (Read 1247 times)

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Printwear Magazine
« on: October 11, 2012, 02:05:46 PM »
Hey Folks. Looks like I got sucked back into the trade rag biz again. The good news is I should be able to list this forum in the bio. I'll be running a monthly column and will be looking to some of you for installment ideas if you're so inclined. Also If you have a cool pic that pertains to the piece I can submit it for art (no gaurantees but if it gets in you will get credit) First installment is in April and it covers.........you guessed it.......discharge and WB printing prep and techinques. Going for the cover!


Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5907
  • Email me at art@designsbydottone.com
Re: Printwear Magazine
« Reply #1 on: October 11, 2012, 02:09:39 PM »
Congrats!  You would make a great contributor!  Looking forward to reading your stuff.  :)
Artist & high end separator, Owner of The Vinyl Hub, Owner of Dot-Tone-Designs, Past M&R Digital tech installer for I-Image machines. Over 35 yrs in the apparel industry. e-mail art@designsbydottone.com

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Printwear Magazine
« Reply #2 on: October 11, 2012, 02:11:46 PM »
Thanks Dan you'd think after 70 articles I'd have nothing left to say but a few years break and the birth of this forum has breathed a little life back in me.

Offline Screened Gear

  • Gonzo Member
  • ******
  • Posts: 2580
Re: Printwear Magazine
« Reply #3 on: October 11, 2012, 02:12:49 PM »
I can't wait to read your stuff.

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: Printwear Magazine
« Reply #4 on: October 11, 2012, 02:16:33 PM »
Congrats!
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: Printwear Magazine
« Reply #5 on: October 11, 2012, 02:27:49 PM »
Nice, congrats.

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5683
Re: Printwear Magazine
« Reply #6 on: October 11, 2012, 03:01:49 PM »
Thanks all. Remember proper credit will be given accordingly (with permission). Those who might not remember The Printers Perspective it was specifically designed not to be overly technical, just a
"this is what works for me now you try" approach and is not product specific. We covered everything from How to develop a Pre-print line to the Ins and Outs of Scheduling to How to survive a Compliance Audit as well as of course, screen printing. We'll be touching on all those subjects with an updated perspective as well as uncovering new ground on occaision. I'll do my best to give nods to this forum as much as I will be allowed.
Maybe we'll attract some new blood instead of the usual scoundrels!

Offline Orion

  • !!!
  • Hero Member
  • *****
  • Posts: 764
  • Ain't no shortcuts in screen printing.
Re: Printwear Magazine
« Reply #7 on: October 11, 2012, 03:08:28 PM »
Great news Tony, looking forward to some good reading.
Dale Hoyal

Offline bimmridder

  • Gonzo Member
  • ******
  • Posts: 1886
Re: Printwear Magazine
« Reply #8 on: October 11, 2012, 04:39:10 PM »
Outstanding Tony. I look forward to reading what you write.
Barth Gimble

Printing  (not well) for 35 years. Strong in licensed sports apparel. Plastisol printer. Located in Cedar Rapids, IA

Offline Action1

  • Sr. Member
  • ****
  • Posts: 486
Re: Printwear Magazine
« Reply #9 on: October 11, 2012, 04:53:16 PM »
Hey Folks. Looks like I got sucked back into the trade rag biz again. The good news is I should be able to list this forum in the bio. I'll be running a monthly column and will be looking to some of you for installment ideas if you're so inclined. Also If you have a cool pic that pertains to the piece I can submit it for art (no gaurantees but if it gets in you will get credit) First installment is in April and it covers.........you guessed it.......discharge and WB printing prep and techinques. Going for the cover!


Looking forward to seeing more articles Tony. I always read the last ones. They were very well written and informative. We're glad that you're back in the trade rag biz!