screen printing > Separations

PRINT OFF for Sim process

<< < (4/4)

killergraphics:
My guys do not know what PMS is unless they are at home.

I do a good bit of sim process. I do do (pun intended) most of my own seps.

And if you have looked at any of my samples it works for my market.
www.myTguys.com

I can print most jobs with
stock ink.
white 1 reg 1 poly. Even on a poly shirt I use reg inks on top of the poly ink.
traffic and kelly green
2 different reds brite and flag
4 blues That I mix, powder blue, 1 that I take up and down just under royal, royal and navy.
3 browns
aqua
lemon yellow
ath gold
orange
a couple grays that I mix
and 2 different blacks.

I'm sure I left something out, But all the rest of the colors are made in the sep.

Dottonedan:
It looks to be that we are going the route of various press types and colors.

I think the next step is for me to be able to send out one image that is then gread to your specific press.  I would love to show results on a 6 color auto and a 6 color manual.

I will do a 6 color and a 10 color Sep. I think it's not so extreme to see a 7 color next to a 6 color.
I provide the seps and then you use whatever inks you normally use in your shop.

 Required consistentcy;
 mesh size, halftone count, screen angle, dot shape, Garment color, garment brand,# of colors being either 6 or 10

Once I announce the art being ready, I will get confirmation as to who is committed to sending printed results and I will send out seps.

You MUST send in a printed sample.

Thanks
Dan

alan802:
I've been out of town for a while and just now saw this thread.  I'd be very interested in doing something like this. I'm assuming it's going to be on darks?  I'll go back and re-read the first couple posts to see if I missed that so don't answer me if it's been talked about.

Navigation

[0] Message Index

[*] Previous page