Author Topic: SRoque - Ryonet?  (Read 51863 times)

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: SRoque - Ryonet?
« Reply #30 on: September 13, 2012, 11:41:38 AM »
Their forum wont be the last one that gets taken down by the con man screen print snake oil salesman. DS is circling the drain as we speak. Its a shame as it was a great classified site.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: SRoque - Ryonet?
« Reply #31 on: September 13, 2012, 12:39:05 PM »
Yes, true about DS (but of course what would Gilly and Brandt do otherwise with their few free hours? lol!) but what I am talking about is completely on Hirsch.
When they returned in June of '11, they asked for member input. They were asked point blank to please confirm or deny the assertion that they specifically hired the hit man to do the dirty work that ruined TSPMB.
They refused to address it! "Too silly to even comment on" was their response as if we haven't heard that type of non-denial before from our business and political leaders.

Good luck to Ryan and SRoque if there is are similar seeming ties.

That rug really tied the room together, did it not?

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #32 on: September 13, 2012, 01:05:52 PM »
Yes, true about DS (but of course what would Gilly and Brandt do otherwise with their few free hours? lol!)

What would you all do with the time you spend reading it.

 ;)


LMAO
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #33 on: September 13, 2012, 01:09:48 PM »
Do you want me to come on here and beat up on Brandt? ;)

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #34 on: September 13, 2012, 01:15:58 PM »
Do you want me to come on here and beat up on Brandt? ;)

Lord knows you have time, you don't print anything all day ;)

BTW I am just joking around. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #35 on: September 13, 2012, 01:18:50 PM »
I do print less than you... so yeah, you are right. ;)

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #36 on: September 13, 2012, 01:44:53 PM »
I do print less than you... so yeah, you are right. ;)

I dont print anything.  My employees do though lol
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #37 on: September 13, 2012, 01:58:13 PM »
Well, same here... but my employee prints less than your employees.

Isn't this argument going the wrong way. ;)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13980
  • Docendo discimus
Re: SRoque - Ryonet?
« Reply #38 on: September 13, 2012, 02:02:50 PM »
It's actually not going anywhere, and you guys don't even need to pad your post count.

Get back to work, I know that I have to go print that job I showed that the last folks did so poorly!
That rug really tied the room together, did it not?

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #39 on: September 13, 2012, 02:06:59 PM »
Well, same here... but my employee prints less than your employees.

Isn't this argument going the wrong way. ;)

I dunno man, we only print 2-3 days a week.  We are not a high volume print shop.  We dont even turn on the auto sometimes for a week or more in the winter.  (last year anyway).   

We do a ton of artwork though, probably do more artwork in dollar figures than some think we do total as a company.  We are lucky to have a great mix of art/print/embroidery. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #40 on: September 13, 2012, 02:07:49 PM »
It's actually not going anywhere, and you guys don't even need to pad your post count.

Get back to work, I know that I have to go print that job I showed that the last folks did so poorly!


See... you better leave me and Brandt along with all our BS on DS. ;)

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #41 on: September 13, 2012, 03:00:00 PM »
Well, same here... but my employee prints less than your employees.

Isn't this argument going the wrong way. ;)

I dunno man, we only print 2-3 days a week.  We are not a high volume print shop.  We dont even turn on the auto sometimes for a week or more in the winter.  (last year anyway).   

We do a ton of artwork though, probably do more artwork in dollar figures than some think we do total as a company.  We are lucky to have a great mix of art/print/embroidery.

You guys still print WAY more that I do... but I've just been gearing up.  Now that I got my conex box (see other thread), I can make way and get things in full swing.  Then once auto gets here and we get that under control... BOOM!

I don't seek out any work right now, everything finds me some how.


Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #42 on: September 13, 2012, 04:25:59 PM »
Well, same here... but my employee prints less than your employees.

Isn't this argument going the wrong way. ;)

I dunno man, we only print 2-3 days a week.  We are not a high volume print shop.  We dont even turn on the auto sometimes for a week or more in the winter.  (last year anyway).   

We do a ton of artwork though, probably do more artwork in dollar figures than some think we do total as a company.  We are lucky to have a great mix of art/print/embroidery.

You guys still print WAY more that I do... but I've just been gearing up.  Now that I got my conex box (see other thread), I can make way and get things in full swing.  Then once auto gets here and we get that under control... BOOM!

I don't seek out any work right now, everything finds me some how.

That's how we are.  Everything comes to us, and IMO best way to be.  Grow as the demand for you grows.  If you run out and "sell" people you could experience unrealistic growth which could stumble off, or grow too fast.  I am not saying don't sell.  I am saying be smart about it. 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: SRoque - Ryonet?
« Reply #43 on: September 13, 2012, 04:29:51 PM »
Oh because I thought you promoted your self on face book and such... must have been a different dude in that other thread. ::)

Offline GraphicDisorder

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5872
  • Bottom Feeder
Re: SRoque - Ryonet?
« Reply #44 on: September 13, 2012, 05:23:55 PM »
Oh because I thought you promoted your self on face book and such... must have been a different dude in that other thread. ::)

I wouldn't call that selling at least not how "selling" is considered to many.

Selling = going to the local XYZ place and pushing shirts on them.  Doing mailers, Radio Ads, etc. 

IMO that is different than someone electing to see what you are up to (on facebook). 
Brandt | Graphic Disorder | www.GraphicDisorder.com
@GraphicDisorder - Instagram | Facebook | Twitter | Youtube